Posts categorized as "auto diagnostic tool"

How to Register BMW Battery with Foxwell NT510

Foxwell NT510 is more than just an OBD2 scan tool. If you buy the scanner you get to have your own BMW diagnostic scanner that you can use if in the future you have problems with engine, airbag, transmission, ABS and more.  As we all know NT510 will register BMW new battery, but have no idea how to.

Here’s the little guide on registering BMW battery with NT510 BMW scanner.

 

Background information: 

What is BMW Battery Registration?

During BMW battery registration process the following happens.

  • Battery capacity is set to 80%
  • Current Odometer reading is stored
  • Delete stored battery statistics such as:
    • current,
    • voltage,
    • battery charge level.
  • Stored temperature statistics are deleted

These steps are completed by the BMW scan tool that you will use to complete BMW battery registration. Don’t need to worry about completing these steps one by one. Just complete new BMW battery programming as outlined below.

BMW registration is very simple and straight forward procedure as long as you don’t change battery type and rating. During the battery registration process old battery charging history gets deleted. Now your BMW DME module knows the battery is new and doesn’t require as aggressive chargings as the old battery. This step should be performed every time the battery gets replaced.

If you change the battery rating and type you will need to perform coding as well to let your BMW (IBS / Power Module) know how to handle the new battery.

 

Which BMW models need battery registration? 

Here is a list of some BMWs that need battery registration. Always verify with your dealer.

E61, E63, E64, E65, E66, E67, E70, E71, E72, E81, E82, E84, E87, E88, E89, E90, E91, E92, E93, F01, F10.

 

What you need:

Foxwell NT510 Multi-system scanner

 

 

How-to:

Step 1: Replace BMW Battery

Better stick with an AGM (Advanced Glass Mat) battery instead of switching to lead acid batteries if the stock was AGM battery.

 

Step 2: Register a new battery

Locate the on board diagnostic (OBD – 2) port under the dashboard near your brake pedal. Plug your BMW Foxwell NT510 scan tool into this port.

Turn the key to option II but don’t not start engine. If you have a Push Start button press it a couple of times. Don’t press the brake pedal when you press the start button. All the dashboard lights should turn on.

Register the new BMW battery with NT510:

1.Plug your Foxwell NT510 BMW scanner into the OBD2 port under the dashboard.

2.Turn ignition on, the key to position II. Do not start your car.

foxwell-nt510-register-bmw-battery-1

3. Select BMW. Scan for VIN. It will automatically look up the VIN number. Once VIN is found press OK.

foxwell-nt510-register-bmw-battery-2

4. Scroll down to the Body menu 4.

foxwell-nt510-register-bmw-battery-3

5. Scroll down to Power Supply (Battery) and press Enter.

foxwell-nt510-register-bmw-battery-4

6. Select option 2 for Battery registration.

foxwell-nt510-register-bmw-battery-5

In the next screen, you can perform the following.

  1. Register new battery. Battery replacement is the same as the original.
  2. Change battery capacity to higher or lower.
  3. Change battery type between AGM and lead acid battery.

NOTE:

  • Do not unplug the scanner during the battery registration process
  • Do not turn off the ignition during the battery programming.
  • You don’t need to run option 2 and 3 if your replacement battery has the same specs as the old battery. Just new battery registration is all you need to complete.

 

 

BMW/Mini Cooper Foxwell NT510 battery registration and coding success reviews:

  1. BMW E60 M5

You can also perform BMW maintenance functions such as registering a new battery, read and clear adaptations, activate and test all of the modules individually, engage the transmission, among many others.

  1. 2008 BMW E93

Register a new battery -OK

  1. 2009 BMW 335i (American)

Do battery registration – ok

  1. BMW E90 328i -OK
  1. Code a new battery on 08-2011 M3’s
  1. Can code injectors and new battery on 2008 BMW 135i
  1. Foxwell NT510 find BMW 90 bad cylinder and I replace one:

Registering a battery is super easy. It gives you the option to say that you upgraded the Ah rating as well if you are having trouble finding an OEM spec battery.

www.obdii365.com

http://blog.obdii365.com/2017/10/11/register-bmw-battery-with-foxwell-nt510-scanner/

How to Install VAS 5054A ODIS-E 6.7.5 on Windows 7

VAG diagnostic software ODIS engineering version ODIS-E 6.7.5 has been tested working perfectly. Here are the free download and installation instructions by obdii365.com engineer.

 

Version: ODIS-E 6.7.5; Postsetup 67.5.10

Language:Dutch,English,Czech, Spanish, French, Chinese

Compatible device: VAS 5054A Bluetooth interface, VAS 5054A Plus

Operating system: Windows 7 32bit/64bit; Windows 8.1

odis-675-26

Free Download:

ODIS Engineering 6.7.5  full keygen+Launcher + Postsetup (no password):
ODIS Engineering 6.7.5 Patch:
(key.exe+license.dat+offboarddiaglauncher.exe)

Download ODIS Engineering – ODIS-E 6.7.5 – PostSetup ISO (personal tested)

no password or anything, just doing my part to help.

 

How to install VAS5054A ODIS-E 6.7.5?

Main steps:

Step 1: Install setup assistant

Step 2: Register ODIS-E 6.7.5

Step 3: Download Postsetup

Step 4: Test ODIS Engineering 6.7.5

Step 5: Repair Bluetooth

Step 1: Install Setup Assistant

Change date and time

odis-675-1
Change date to January 1st, 2017 (UTC-8:00) Pacific Time (US & Canada)

Open ODIS-E 6.75 software CD

odis-675-2

Copy 6.7.5 kg-pass 123 zip file to desktop

odis-675-3

Extract zip file on desktop with encrypted password: 123

Delete zip file on desktop

odis-675-4
Copy 6.75 工程师(engineering) folder to desktop and open it

odis-675-5
Open OffboardDiagSetup-Engineering_6_7_5

Select setup language
Install ODIS-E setup assistant
Click on Next
select Target folder
click Next
select a directory C:/ODIS-DIAG-MODULES-ENGIN
click on Next

odis-675-6
select diagnostic interface: VAS 5054

A bluetooth pairing must be established to use the vas5054, click on Next
License file selection

odis-675-7

odis-675-8

search desktop->工程 6.7.5 folder->license.dat
click next
Tick create a folder in the start menu
click Next
installing Offboard Diagnostic Information System Engineering

install Microsoft Visual C++2005

Accept the windows security warning by clicking on Install

odis-675-9
Finish install Setup assistant
Restart the computer

 

Step 2: Register ODIS-E 6.7.5

Delete VW-MCD-PDX-Builder file on desktop

odis-675-10

Start-> All Program-> Offboard Diagnostic Information System Engineering folder ->Send Offboard Diagnostic Information System Engineering software to desktop

odis-675-11

Start-> All Program->Softing D-PDU API for VCIs V1.20.037 folder->send EDIC Configuration Manager to desktop

Right click Offboard Diagnostic Information System on desktop open Properties->Open file location

odis-675-12
Open 工程 6.7.5 folder on desktop

Copy and replace OffboardDiagLauncher on Offboard Diagnostic Information System desktop folder

odis-675-13
Open Offboard Diagnostic Information System software on desktop

odis-675-14
Software will require to enter registration key
Open 工程 6.7.5 folder on desktop
Open key generator

odis-675-15

enter registration name: abc
Copy Hardware ID to key generator and click on Generate

it will generate registration key

odis-675-16
paste the key to software Key area
click Register

 

Step 3: Download Postsetup

open ODIS-E postsetup
select local directory

odis-675-17

C:/Users/AADD/Desktop/6.75 Engineering-> Database->ODIS_Engineering

if software prompt “no valid software configuration could be found”, select the  destination

odis-675-18

C:/Users/AADD/Desktop/6.75 Engineering-> Database
click next
select Postsetup language

odis-675-19
check postsetup version:67.5.10
Press next icon to download postsetup

download completed will launch software automatically

 

Step 4: Test Software

Select Admin->Diagnostic data

odis-675-21
open C:/Users/AADD/Desktop/6.75 Engineering-> diagnostic data->AU (Audi)->ODXUPDATE

odis-675-22

Select LB (Lamborghini, Bentley),SE (Seat),SK (Skoda),VW ODXUPDATE on by one

Connect VAS 5054a with computer by USB

odis-675-24

Open Computer->Manager->Device Manager->Softing Vehicle Interface->VAS5054

Open EDIC Configuration Manager

odis-675-25
Current connection is USB connection
Open Offboard Diagnostic Information System Engineering software on desktop
click on Diagnosis

odis-675-26

odis-675-27

odis-675-28

Coding function

odis-675-30

odis-675-31

special functions, i.e ECU programming, application programming etc

odis-675-32

odis-675-33

Step 5:  Pair Bluetooth

Installing device driver software

odis-675-35
device is ready

odis-675-35
select Bluetooth icon,add a device VAS5054

odis-675-36
ener the device pairing code: 082145725
click on Next
this driver has been successfully added to this computer
Open EDIC Configuration Manager-> Add a new device

odis-675-37
select COM Port 4

odis-675-38
Bluetooth connection and com port setup success.

Run ODIS-E 6.7.5 software and diagnose vehicle.

 

www.obdii365.com

http://blog.obdii365.com/2017/10/06/install-vas-5054a-odis-engineering-6-7-5/

Renault CAN CLIP V171 Windows 7 Installation Guide

Update: CANCLIP 171 for Renault is tested successfully. How to install Renault CAN CLIP v171 diagnostic software.. Here you go.

 

Renault CAN CLIP V171 NEW FEATURES: Renault-CAN-CLIP-V171-download-new-features

Fitted in new vehicle: ALPINE A110 and DUSTER ph3.

 

Renault CAN CLIP V171 software download: (100% works)

http://www.obdii365.com/wholesale/cd-software-of-can-clip-v151-for-renault.html

 

Have tested no issues on:

Sp19-a: Quality A+++Renault CAN CLiP diagnostic interface

Sp19-c: High QualityRenault CAN CLiP diagnostic tool

Sp19-d: CheapestRenault CAN CLiP diagnostic tool

Sp19-E: Renault CAN CLIP with AN2135SC AN2136SC Full Chip

(Renault CAN CLIP china clones comparison:

http://blog.obdii365.com/2016/12/09/renault-can-clip-v162-cheapest-and-best-quality/ )

 

GENERAL INFORMATION:

 

Change of the display for data confirmation shown before the reprogramming of a calculator in order to emphasise the use of the criterion “Technische Spezifikation des Fahrzeugs”

 

Warning :

 

Maintenance of the Tecra A11 and CF19 MK2 ceased in January 2017 and they can no longer be registered.

 

Since January 2016 the DELL E5500 units have no longer been serviced and cannot therefore be registered any longer.

 

Since August 2015 the PANASONIC CF19 MK1 units have no longer been serviced and cannot therefore be registered any longer.

 

Maintenance of the PANASONIC CF18s ceased in May 2014 and they can no longer be registered.

 

 

Starting with DVD CLIP 161, reprogramming with a battery tension lower than 13V is no longer possible.

 

You absolutely have to connect a battery charger to the vehicle.

 

Three charger are currently available:

– Ateq BC512 (with or without printer)

– Acctiva Fronius Professional Flash 50A

– GYS Flash 50-12HF (rather favorable)

 

Please make sure you have this battery charger before starting any work.

 

How to install Renault CAN CLIP 171 on Windows 7 32 bit:

Usually, it takes one hour around to install Renault can clip software with the steps below:

Step 1 – install DAEMON Tools Lite

Step 2 – run Crack Renault CLIP

Step 3 – install CLIP 171

Step 4 – setup CLIP properties

Step 5 – register CLIP

Step 6 – setup in Computer management

Step 7 – diagnose cars via CLIP 171

 

How to install Renault CAN CLIP diagnostic interface on Windows 7 64bit:

 

*** why some Renault CLIP cannot work on Widows 7 64bit?

 The Clip software itself works with 64bit version of Windows 7 but the hardware wont.. Simply because the there are no 64bit drivers for SONDE can clip..

 

 I think there are no drivers made for 64bit windows
it
 works only with 32bit windows

 

*** What to do if Renault CAN CLIP cannot work on Windows 64 bit?

-Try disable driver signature enforsment in win 64bit..that help many times

 

 Or just RIGHT CLICK the .inf File and click INSTALL
Then if you get certificate error you can fix that in device manager/
by right click and install certificate even if invalid

 

 You need to know your can clip is probe (sonde) or alliance.
alliance = works both on 32 and 64 bit os
probe (sonde) = works only on 32 bit os
i think sonde is better than alliance

You can disassemble your CAN Clip and check it on PCB

real CAN CLIP PROBE clone  RLT2002

 

Renault CAN CLIP car list:

Renault-CAN-CLIP-V171-car-list

TWINGO

TWINGO PHASE 2

TWINGO II

TWINGO III

WIND

MODUS

CAPTUR/QM3/KABIN

CAPTUR/KAPTUR BR/IN/RU

CLIO

CLIO 2

CLIOIIP2/3/4

CLIO II PH 6

CLIO III

CLIO IV

THALIA/SYMBL

THALIA/SYMB 2

CLIO V6

CLIO V6 PH 2

MEGANE/SCEN

MEGANE II

SCENIC II

MEGANE III/SCENIC III

MEGANE IV

SCENIC IV

MEGANE IV SEDAN

KADJAR

KADJAR CN

KOLEOS/QM5

KOLEOS II/QM6

KOLEOS II CN/QM6 CN

LAGUNA

LAGUNA PHASE 2

LAGUNA II

LAGUNA PHASE 2

LAGUNA II

LAGUNA II PHASE 2

LAGUNA III

TALISMAN/SM6

SAFRANE

VEL SATIS

VEL SATIS PH2

AVANTIME

ESPACE

ESPACE IV

ESPACE PH2/3/4

ESPACE V

KANGOO

KANGOO MUX

KANGOOVLL

KANGOO II

KANGOO ZE/STOPSTART/PH2

TRAFIC

TRAFIC II

TRAFICP2/3

TRAFIC III

MASTER

MASTER PH2

MASTER PH3

MASTER RWD

MAST RWD PH2

MAST RWD PH3

MASTER III

SPIDER

SUPER 5

EXTRA

R19

R21/SAVANNA

R25

ALPONE

R5

R4

R9

R11

R12

R18

FUEGO

JEEP

LAGAN

SANDERO

LOGAN II/SANDERO II

DUSTER

DUSTER PH2

LODGY

DOKKER/KANGOO

NEW SM3/FLUENCE/MEGANE

LATITUE/SM5

SM7 – L7

TWIZY

ZOE

KWD

KWD BR

ALASKAN

 

MEGANE/SCEN

BA00…BA09

BA0A…BA0K, BA0L, BA0N, BA0R…BA0Y

BA10…BA19

BA1A, BA1C, BA1D, BA1F, BA1H, BA1AJ, BA1K, BA1M, BA1R, BA1U, BA1V, BA2A

DA02, DA03, DA04, DA05

DA0B, DA0C, DA0D, DA0F, DA0G, DA0H, DA0P, DA0W

DA10, DA11, DA13, DA14

DA1F, DA1H, DA1J, DA1S

EA01, EA02, EA03, EA04

EA0B, EA0C, EA0D, EA0F, EA0H, EA0P, EA0W

EA10, EA11, EA13

EA1H, EA1J, EA1S

FA05, FA0E, FA0J, FA0K, FA0N, FA0Y

JA00, JA01, JA04, JA05

JA0B, JA0C, JA0D, JA0E, JA0F, JA0G, JA0J, JA0K, JA0L, JA0N, JA0W, JA0Y

JA10…JA19

JA1A, JA1B, JA1D, JA1F, JA1H, JA1J, JA1K, JA1L, JA1M, JA1E, JA1S, JA1U, JA1V

JA2A, JA2B, JABF

KA01, KA04, KA05, KA06

KA0B, KA0D, KA0F, KA0J, KA0N, KA0V, KA0W

KA10, KA12, KA12

KA1A, KA1F, KA1H, KA1J, KA1M, KA1R, KA1U

LA00, LA01, LA02, LA04…LA09

LA0A, LA0B, LA0D, LA0E, LA0F, LA0G, LA0J, LA0K, LA0L, LA0N, LA0R, LA0S, LA0T, LA0U, LA0V, LA0W, LA0Y

LA10, LA11, LA12, LA16, LA19

LA1A, LA1C, LA1D, LA1F, LA1H, LA1J, LA1K, LA1L, LA1M, LA1R, LA1U, LA1V

LA2A

NA0B

SA01, SA05, SA09

SA0A, SA0E, SA0K, SA0N, SA0R, SA0U, SA0Y

SA1U

VA0J

MEGANE II

BM00, BM02, BM05, BM08

BM0B, BM0C, BM0F, BM0G, BM0H, BM0J, BM0L, BM0M, BM0T, BM0U, BM0W, BM0Y

BM11, BM13, BM14, BM16, BM17

BM1A… BM1G

BM1K, BM1M, BM1N, BM1R, BM1S, BM1T, BM1V, BM1W, BM1Y

BM20, BM2A, BM2B, BM2C, BM2K, BM2P, BM2V, BM2Y

CM00, CM02, CM05, CM08

CM0B, CM0C, CM0F, CM0G, CM0H, CM0J, CM0L, CM0M, CM0T, CM0U, CM0W, CM0Y

CM1I, CM13, CM14, CM16, CM17

CM1B, CM1C, CM1E, CM1F, CM1G, CM1K, CM1L, CM1M, CM1N, CM1R, CM1S, CM1T, CM1U, CM1V, CM1W, CM1Y

CM20, CM2C, CM2H, CM2J, CM2P, CM2R, CM2V, CM2Y

EM05, EM0C, EM0G, EM0J, EM0S, EM0U, EM0W

EM14, EM16, EM17

EM1B, EM1C, EM1D, EM1E, EM1G, EM1K, EM1M, EM1N, EM1R, EM1T, EM1U,

EM2C, EM2P, EM2T

GM02, GM0F

GM1E, GM01F

KM00, KM02, KM05, KM0B, KM0C, KM0G, KM0H, KM0J, KM0L, KM0S, KM0T, KM0U, KM0Y

KM13, KM14, KM16, KM17

KM1A, KM1B, KM1D, KM1E, KM1F, KM1G, KM1K, KM1M, KM1N, KM1R, KM1S, KM1U

KM23, KM24, KM26

KM2E, KM2F, KM2G, KM2K, KM2 KM2L, KM2M, KM2N, KM2V, KM2Y

LM00, LM02, LM05, LM08

LM0B, LM0C, LM0F, LM0G, LM0H, LM0J, LM0L, LM0P, LM0S, LM0T, LM0U, LM0Y

LM13, LM14, LM16, LM17

LM1A, LM1B, LM1D, LM1E, LM1F, LM1G, LM1K, LM1M, LM1N, LM1R, LM1S, LM1U

LM20, LM23, LM4

LM2A…LM2G

LM2L, LM2M, LM2N, LM2S, LM2T, LM2V, LM2Y

SM02, SM0F, SM16, SM1E, SM1F

MEGANE III / SCENIC III

BZ00, BZ03, BZ09

BZ0A, BZ0B, BZ0C, BZ0D, BZ0F, BZ0G, BZ0H, BZ0J, BZ0K, BZ0L, BZ0N, BZ0P, BZ0R, BZ0T, BZ0U, BZ0W, BZ0Y

BZ10, BZ11, BZ12, BZ13, BZ16

BZ1A, BZ1B, BZ1G, BZ1H, BZ1J, BZ1K, BZ1M, BZ1P, BZ1R, BZ1S, BZ1T, BZ1U, BZ1V, BZ1W, BZ1Y

BZ20, BZ23, BZ24, BZ25, BZ27, BZ28, BZ29

BZ2A, BZ2B, BZ2C

DZ00, DZ03, DZ04, DZ09

DZ0A, DZ0B, DZ0C, DZ0D, DZ0F, DZ0G, DZ0H, DZ0J, DZ0K, DZ0L, DZ0N, DZ0R, DZ0T, DZ0U, DZ0V, DZ0W, DZ0Y

DZ10…DZ18

DZ1A, DZ1E, DZ1G, DZ1H, DZ1J, DZ1K, DZ1M, DZ1N, DZ1P, DZ1S, DZ1T, DZ1U, DZ1V, DZ1W, DZ1Y

DZ20, DZ21, DZ23, DZ24, DZ25, DZ27, DZ28, DZ29

DZ2A, DZ2B, DZ2C

EZ00, EZ03, EZ09, EZ0L, EZ0N, EZ0P

EZ10, EZ14, EZ116, EZ1E, EZ1G, EZ1P, EZ1S, EZ1T, EZ1U, EZ1V, EZ1Y

EZ28, EZ29, EZ2A

JZ00, JZ02, JZ03, JZ09

JZ0A, JZ0B, JZ0D, JZ0F, JZ0G, JZ0J, JZ0L, JZ0N, JZ0P, JZ0R, JZ0U, JZ0Y

JZ10, JZ11, JZ12, JZ13, JZ14, JZ16

JZ1B, JZ1E, JZ1G, JZ1H, JZ1K, JZ1M, JZ1P, JZ1S, JZ1U, JZ1V, JZ1W, JZ1Y

JZ24, JZ25, JZ26, JZ28, JZ29

JZ2A, JZ2B, JZ2C

KZ00, KZ03, KZ09

KZ0A, KZ0B, KZ0C, KZ0D, KZ0F, KZ0G, KZ0H, KZ0J, KZ0K, KZ0L, KZ0N, KZ0P, KZ0R, KZ0U, KZ0W, KZ0Y

KZ10, KZ11, KZ12, KZ13, KZ14, KZ16

KZ1A, KZ1G, KZ1M, KZ1P, KZ1R, KZ1S, KZ1T, KZ1U, KZ1V, KZ1W, KZ1Y

KZ20, KZ23, KZ24, KZ25, KZ27, KZ28, KZ29

KZ2A, KZ2B, KZ2C

MEGANE IV

B9A1, B9A3, B9A4, B9A5, B9AE

B9M0, B9M6, B9MF, B9MR, B9MS, B9MV, B9NC

K9A1, K9A3, K9A4, K9A5, K9AE

K9M0, K9MF, K9MR, K9MS, K9MV, K9NC

MEGANE IV SEDAN

LVA1, LVA3, LVA4

LVM0, LVM3, LVMR

NEW SM3/FLUENCE/MEGANE

B30A, B303, B30A, B30B, B30C, B30D, B30F, B30G, B30J, B30K, B30L, B30M, B30P, B30R, B30S, B30T, B30V

B330, B332, B337, B33C, B33F, B33K, B33L

L300, L301, L302, L304, L305, L306, L307, L308, L309

L30A, L30B, L30C, L30D, L30F, L30G, L30H, L30J, L30K, L30L, L30M, L30P, L30R, L30S, L30T, L30V, L30W, L30Z

L330, L331, L332, L333, L336, L337, L339

L33B, L33C, L33F, L33G, L33H, L33J, L33K, L33L, L33M, L33N, L33P, L33R, L33S, L33T, L33U, L33V, L33W, L33Y

XX38

 

 www.obdii365.com

http://blog.obdii365.com/2017/09/27/install-renault-can-clip-171-on-windows-7/

VAS 6154 Tested Successfully: Passat 3C 2007 BSE 1.6L Simos/75kW

Finally have VAS 6154 clone VAG diagnostic interface (same as vas 5054a).. Fast delivery. Today i tested on Passat 3C 2007 with an engine BSE 1.6L Simos/75kW.

Now I‘ll chip in some words of my experience for vas 6154 review.

 

 

Install odis-service 4.1.3 software crack (about an hour i took)

Then connect device the VAS 6154 to the ECU

vas-6154-odis-4.13-review-(3)

Then connect to the laptop via a USB cable

Install Vas 6154 driver software after connection to laptop

vas-6154-odis-4.13-review-(1)

vas-6154-odis-4.13-review-(2)

vas-6154-odis-4.13-review-(5)

vas-6154-odis-4.13-review-(6)

The driver software installation completes

Vas 6154 is ready to use

vas-6154-odis-4.13-review-(7)

Vas6154 diagnostic tool hardware information

vas-6154-odis-4.13-review-(10)

vas-6154-odis-4.13-review-(11)

vas-6154-odis-4.13-review-(12)

Run odis 4.1.3 software

(note: there are many download links for free on the web, but you are not advised to use it coz most are not tested by professionals!)

vas-6154-odis-4.13-review-(14)

vas-6154-odis-4.13-review-(15)

vas-6154-odis-4.13-review-(16)

vas-6154-odis-4.13-review-(17)

Vas 6154 is running Odis 4.1.3, the main interface

vas-6154-odis-4.13-review-(18)

vas-6154-odis-4.13-review-(19)

Vas 6154 odis 4.1.3 go to diagnostic on

Volkswagen 3C Passat 2007 Sedan Engine: BSE 1.6L Simos/75kW

vas-6154-odis-4.13-review-(20)

vas-6154-odis-4.13-review-(21)

vas-6154-odis-4.13-review-(22)

vas-6154-odis-4.13-review-(23)

vas-6154-odis-4.13-review-(25)

vas-6154-odis-4.13-review-(26)

vas-6154-odis-4.13-review-(27)

vas-6154-odis-4.13-review-(28)

vas-6154-odis-4.13-review-(29)

vas-6154-odis-4.13-review-(30)

vas-6154-odis-4.13-review-(31)

vas-6154-odis-4.13-review-(32)

vas-6154-odis-4.13-review-(33)

vas-6154-odis-4.13-review-(34)

vas-6154-odis-4.13-review-(35)

vas-6154-odis-4.13-review-(36)

vas-6154-odis-4.13-review-(39)

vas-6154-odis-4.13-review-(40)

vas-6154-odis-4.13-review-(42)

vas-6154-odis-4.13-review-(43)

vas-6154-odis-4.13-review-(44)

vas-6154-odis-4.13-review-(45)

vas-6154-odis-4.13-review-(46)

Vas 6154 read fault codes no issues.

Exit odis-s software

vas-6154-odis-4.13-review-(47)

vas-6154-odis-4.13-review-(48)

vas-6154-odis-4.13-review-(49)

 

Vas 6154a clone and odis work like a charm. Good!

 

www.obdii365.com

http://blog.obdii365.com/2017/09/25/vas-6154-odis-4-1-3-works-on-passat-3c-2007/

V2017.9 MB Star InstallShield Wizard interrupted Solution

Provide solution to MB Star diagnostic SD Connect C4 V2017.9 Xentry OpenShell XDOS installation error “The InstallShield Wizard was interrupted before Xentry Diagnostics Openshell could be completely installed.”

 

Attach installation error picture:

xentry diagnostics OpenShell error

Possible reasons:

1- from virus

2- or Microsoft Message Queue Service is not enable

 

Please make sure you do like these tips:

  1. You need absolute clean windows. choose win 7 32bit
  2. Click to show you the log file and read that. It will be specified what has gone wrong with your install.
  3. Be sure to run your install with administrator rights and have enough room on your HDD.

 

Finally, the problem is solved.

it was the Microsoft Message Queue Service not enabled now is installing fine.

2017-09-mb-star-4

2017-09-mb-star-5

Thanks to http://www.obdii365.com engineer who helped me solve the problem, thumb up for their service.

http://blog.obdii365.com/2017/09/21/fixed-xentry-openshell-installshield-wizard-interrupted/

How to use iScanner MM-007 to replace UDS instrument

Xhorse iScanner VAG MM-007 is not only a diagnostic tool, but also a maintenance tool that can replace  second-hand/used accessories for VAG (VW Audi Skoda Seat)  offline including:

  • Engine (EDC16/EDC17/MED9/MED17/Simos)
  • KESSY(A8/Touareg/Phaeton)
  • Magotan/CC Computer Comfort
  • PQ35 Electronic Power Steering
  • A6/Q7/Allroad transmission
  • A6/Q7/Allroad J518 control unit
  • Replace PQ35 4th Generation Immobilizer UDS instrument

 

Here is the guide on replacing PQ35 4th Generation Immobilizer UDS instrument .

(used to retrofit instrument, replace intelligent/3D instrument or repair broken instrument)

Select Replace PQ35 UDS instrument

iscanner-mm-007-change-uds-0

1. First enter PIN and CS stored in the new instrument . XHorse iScanner MM-007 vag will read PIN and CS from ECU or immo by OBD

iscanner-mm-007-change-uds-1

2.Enter new PIN, CS1 (6 byte CS from ECU), CS2 (another 6 byte CS code). VAG MM-007 will read all ECU information, power level etc.

(Make sure the power level value in Immobilizer system is the same as in ECU)

iscanner-mm-007-change-uds-2

3.Enter new VIN, Immo code

iscanner-mm-007-change-uds-3

4. Check data entered, original PIN, CS1, CS2, power level and new PIN, new CS1, CS2, power level, new VIN and Immo code, then press OK to confirm. Make sure original data you entered are all correct.

iscanner-mm-007-change-uds-4

5. Follow Iscanner VAG MM-007 prompt. Then instrument new PIN, CS, VIN, power lever has been changed.

6. If you have successfully replaced the instrument. You will see 0-0 on dashboard. Then you need to do key learn and Ecu sync with Iscanner VAG MM-007 as well.

 

 

More Xhorse iscanner VAG MM-007 information, please check

http://www.obdii365.com/wholesale/xhorse-iscancar-vag-mm-007-diagnostic-tool.html

How to install V12.20.024 Toyota Techstream on Windows 7

Toyota TIS Techstream V12.20.024 new software  has been tested without issues on Windows 7 operation system and verified working like a charm.
Software version: V12.20.024 
Toyota Techstream 12.20.024 crack free download:
(It’s crack version. Does not need activation)
Operation system: Windows 7 32 bit
Toyota Teschstream v12.20.024 has been tested OK with:
Mini VCI cables (SV46, SV46-B), Mangoose VCI (SV46-C) and Vxdiag Vcx Nano for Toyota
mini vci
mangoose-vci
vcx-nano-for-toyota
How-to’s:
 Step 1: install Toyota Techstream 12.20.024 software
open Techstream 12.20.024 disk F:
copy all files to another new folder on Desktop
open Techstream 12.20.024 setup application
choose a setup language for installation
install-techstream-12-20-024-01
preparing setup
Next to install Techstream software
install-techstream-12-20-024-02
accept the agreement
enter the user name and company name, then Next
begin Techstream 12.20.024 installation
installing Techstream 12.20.024…
successfully installed Techstream
install-techstream-12-20-024-03
Finish Techstream v12 installation
Step 2: replace the MainMenu.exe
copy the MainMenu.exe
go to Techstream Properties on Desktop
open file location
paste and replace MainMenu.exe in Program files/toyota diagnostics/techstream/bin
Step 3: install MVCI driver
run MVCI driver for TOYOTA TIS SETUP
Next to install MVCI driver
install-techstream-12-20-024-04
Install
installing MVCI driver
Finish MVCI driver installation
Step 4: register Techstream
run Techstream application on Desktop
Yes to continue
close the internet explorer
this is Toyota Techstream ver.12.20.024 interface
install-techstream-12-20-024-05
register Techstream software 12.20.024
it’s Techstream crack version
use key (attached to the Instructions.txt) to register
install-techstream-12-20-024-06
OK
exit Techstream
Step 5: check MVCI fw version
run MVCI firmware update tool on Desktop
Device info
install-techstream-12-20-024-07
exit MVCI firmware update tool
Step 6: run Techtsream 12.20.024
run Techstream application on Desktop
Yes to continue
close the internet explorer
install-techstream-12-20-024-08
install-techstream-12-20-024-09
install-techstream-12-20-024-10
install-techstream-12-20-024-11
Techtsream 12.20.024 Windows 7 installation success!

BMW ICOM A2 vs. ICOM Next vs. INPA vs. E-sys

Any cost-effective DIY solution of BMW diagnostic/coding/programming?

Yes, first you should know which a BMW ICOM cable you need: K+DCAN or ENET or ICOM A2/ ICOM Next.

  INPA K+DCAN cable

 

(switch mode)

BMW ENET cable BMW ICOM

 

(ICOM A2ICOM Next)

Image  bmw-enet-esys  bmw-inpa-k-can-cable bmw-icom-next-wifi
Price $17.99 $11.99 $300 around
Vehicle For Exx cars For Fxx cars For ALL Exx & Fxx cars

 

(BMW E, F, G, I, Alpina series cars, MINI and Rolls-Royce from 1985 – 2017)

Software Inpa 5.0.2

 

Ediabas

E sys 3.23.4

 

Psdzdata

Ista-D

 

Ista-P

BMW ETK
BMW KSD
INPA

NCS Expert

WinKFP

E-Sys 3.27.1

BMW AiCoder

BMW FSC code generator

Diagnostic Yes Yes Yes
Coding Yes Yes Yes
Programming No Yes Yes


In summary,

It depends on your purpose (diagnostic or coding or programming) and model (Exx or Fxx or others).

 

For Coding, you need different Tools, NCS Expert / SP-Daten for E-Series and E-Sys / PSdZData for F-Series.

All Diagnosis and Coding can be done with cheap DCAN Cable for E-Series and cheap ENET Cable for F-Series.

 

For Programming (Flashing ECU’s with new Firmware), then you need ISTA/P for for both E-Series and F-Series cars, or you can use WinKFP for E-Series and E-Sys for F-Series. For E-Series Programming, you will need an ICOM, but for F-Series Programming, you can use ENET Cable.

 

For Exx- Series:

Interface = K+DCAN Cable (OBDII to USB) or ICOM

ECU Data Files = SP-Daten

NCS Expert = Coding Software

WinKFP = Programming (Flashing) Software

EDIABAS = Low-Level ECU Communication Software used by NCS Expert & WinKFP

 

For Fxx- / Ixx- / Gxx-Series, Mini, & Rolls-Royce:

Interface = ENET Cable (OBDII to RJ45 Ethernet) or ICOM

ECU Data Files = PSdZData

E-Sys = Coding Software

E-Sys = Programming (Flashing) Software

 

About: BMW ICOM

ICOM A (also ICOM A2, ICOM A3, ICOM Next A): main interface

ICOM B: adapter for programming multimedia in E series

ICOM C: adapter for old BMW with round 20 pin diagnostic plug

ICOM D: adapter for motorcycles

ISTA+ (AKA Rheingold or ISTA-D)

DIAGNOSTICS for All Vehicles

PROGRAMMING for F/I/G/RR & MINI, but requires an ICOM

ISTA-P

PROGRAMMING traditionally for all chassis, but is being phased out by August 2017, except for legacy E-series.

Replacement ECU’s must be NEW

 

YOU HAVE TO KNOW before you buy ICOM A2 or ICOM A3 or ICOM Next:

 

BMW ICOM NEXT vs the old ICOM

-> much faster in BMW F and G series ..

-> supports gigabit Ethernet too to be future proof, there currently is not gigabit Ethernet protocol defined yet for autos. Also it has USB3.0 instead of USB2.0 and a better wifi card. 

 

 

ICOM NEXT A vs ICOM A2

 

-> more stable during programming

-> be necessary for the future Gbit cars

-> faster start-up times and high throughput

-> through high-performance,low-power ARM SoC

-> improved handling

-> more flexible OBD cable

-> lighted button for logs

 

ICOM A vs ICOM A2 vs ICOM A3

 

Modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity. And robust aluminium case will help to avoid damage when using in harsh environments. It works better in cooling, runs faster and works more stable, not easier broken than older ICOM A.

 

ICOM A3 can program all units for all BMW series expect media system, and work more stable and has stronger compatibility than ICOM A2, A1.

How to install Opcom V1.95 software on Windows 7

2017 new Opcom firmware V1.95 China clone diagnostic tool is verified working stable than opcom 1.7and v1.65.
Software version: VAUX-COM 2014V and 2012V optional
Firmware version: V1.95
Operating system: Windows 7/Windows XP
Activation: No
Opcom fw 1.95 PCB Display:
opcom-195-pcb
op-com diagnostic via VAUX-COM 120309a (crack):
2014v VAUX-COM 120309a download:

How to install Opcom V1.95 VAUX-COM Software Driver on Windows 7?

Step 1 Install Driver
Open opcom software CD
install-opcom-195-1
Copy Opcom drivers folder to desktop
Extract Opcom 2012+ DB 2014.zip folder
Copy Opcom 2012+ DB 2014 folder to desktop
Connect opcom 1.95 interface with laptop
install-opcom-195-2
Device driver software was not successfully installed
No driver found.
install-opcom-195-3

Opcon Computer-> Manager->Device Manger-> Other device-> Opcom USB V2
right click Opcom USB V2
select Update Driver Software
Select Browse my computer for driver software
save driver software to C:/Users/AADD/Desktop/Opcom drivers
install-opcom-195-5
Windows has successfully updated your driver software
Check now you can see USB Serial Converter
install-opcom-195-6

right click USB Serial Converter ->Driver tab
Driver has been successfully installed
Step 2: Run Self Test (2014V Software)
Open Opcom 2012+ DB 2014 folder on desktop
install-opcom-195-7
Run VAUXCOM software as administrator
install-opcom-195-8

Select Settings
install-opcom-195-9

Test interface
install-opcom-195-10
Frimware version V01.95
interface test ended successfully
Save configuration.
Step 3:  Run 2014V VAUX-COM 120301a 
Select Diagnostic functions
install-opcom-195-11

Select Automatic Vehicle Identification
select KWP-2000
install-opcom-195-12
It’s a 1997 Opel Omega-B
opcom v1.95 auto detect vehicle information  i.,e VIN, model, engine code etc
select diagnose ECM
install-opcom-195-13
install-opcom-195-14

Select Fault codes functions
install-opcom-195-15
Check Special Functions of this model
install-opcom-195-16
Program immobilizer function options
install-opcom-195-17
Output test options
install-opcom-195-18
Measuring Blocks options
2014V op-com software also supports GM based SAAB and special PSG5 diesel pump
install-opcom-195-19
install-opcom-195-20
Step 4: Run optional 2012V opcom 
Open Opcom 2012 zip file on software CD
install-opcom-195-21
Copy Opcom 2012 folder on desktop
Open Opcom 2012 folder
install-opcom-195-22
Run OP-COM setup as administator
Run self test and diagnostic
install-opcom-195-23
install-opcom-195-24
Done.
Note:
Both Opcom 1.7, V1.65 and V1.95 uses the same VAUX-COM 120309a 2014V software, but opcom 1.95 firmware is more stable than 1.7 and V1.65.
Opcom firmware v1.95 PCB display:
opcom-195-pcb-1
Opcom Firmware V1.7 PCB display(single layer)
opcom-17-pcb-1
Op-com firmware v1.65 PCB display (dual layer)
opcom-165-pcb-1

How to solve BMW DME/DDE module initialization Problem

Here is the expert solution to BMW DME/DDE module initialization  problem

 

(Note: The document was translated from Korean. Credits to Mr. JIHUNX)

 

Background:

The DME(Digital Motor Electronics module of the BMW automobile is a very important module that controls the main operation of the engine (Diesel vehicles include DDE and Digital Diesel Electronics modules). Unlike other modules, the DME / DME2 / DDE module must be coded with the power turned on (ACC On) without coding while the power is turned on at the time of coding. If the initialization is done by pressing the button with the ignition on Codeor the coding is done, the DME module will be blown and various warning lights will appear. Most of the beginner coders initialize ECUs it, and after selecting all , Code it seems that these problems are caused by pressing. Code If you need to initialize by pressing Code, select the individual module and press to initialize it for each individual module.

bmw-DME-module-initialization-1

If the DME module is blown, the starting will be turned off while coding, and if you try to start, there will be a phenomenon that the driving device error will not start. Then, various warning lights are turned on as shown in the figure below.

bmw-DME-module-initialization-2

Solution

By default, the preparation process is the same as the BMW ENET E-sys software coding procedure. I am going to tell you about the theory, not the actual experience. Please note that the names and numbers of the coding files are different because they are synthesized by combining all screenshots. 

  1. Read SVT (VCM) Activate FA (VO) => Read SVT (VCM)) , then proceed to the process (ACC ON state ).
  2. SVT With the DME module selected in the area, Detect CAT for SWE click the button on the right .

bmw-DME-module-initialization-3

  1. After selecting the most recent CAFD OK, press. The current F020-13-11-504 CAFD list is selected because it is the most recent version on the current capture screen .

bmw-DME-module-initialization-4

  1. The DME module will probably have been changed to a blue, red color folder on the SVT list as shown below.

bmw-DME-module-initialization-5

  1. DME With the module name selected Code, click the button on the right screen . Or you can DME right-click on the module name Code and select the same.

bmw-DME-module-initialization-6

  1. If you continue to coded while the green bar is stretched as if you are coding, it is restored normally.

http://www.obdii365.com/producttags/bmw-icom-next.html

Theme: Fresh Print by BlogBaker. Powered by BlogBaker.