Posts categorized as "car key programmer"

How to use VVDI2 to Program BMW BDC lost all key

As for how to make new for FEM/BDC all keys lost, Xhorse engineers make a video step by step and after that attach dozens of pictures with explanation in words.

 

Tools to use:

Xhorse VVDI2 BMW (used to generate BMW FEM/BDC dealer key)

VVDI Prog programmer (used to read 95128/95256 EEPROM data)

BMW FEM/BDC test platform (Is easy to detect FEM BDC Control Module in good condition)

MAGPro2-x17 Programmer (Used to Read ISN code, VVDI pro will calculate parts of ISN but not all)

BMW F series FEM Blade key (New key)

 

Instruction:

In Youtube:

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-01

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-02

Attach dozens of pictures with explanation in words:

  1. Plug the BDC with Test cable

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-03

2.Read the key info.

  1. Go to the preprocessing option. Read and save the encoding file.
  2. Prepare to open the BDC.
  3. Take photos before decomposition and record the location of the fuse.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-04

  1. Break down the BDC.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-05

  1. Clean IC with special solvent and blade.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-06

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-07

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-08

  1. Connect VVDI Prog adapter to read data.

Use the Adapter to read 95256 data (If the reading is unsuccessful, try again and again.)

Read the data many times until the data is read out correctly because the clip may not be fastened.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-09

Verify the consistency of the data that is read more than once.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-10

  1. Open VVDI2 BMW 4.3.0.

Click on “Programming FEM/BDC system”

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-11

Click on “Prepare service EEPROM file”

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-12

Open FEM/BDC module, use VVDI2 programmer to read 95128/95256 EEPROM data, click “OK” to check 95128/95256 location

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-13

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-14

Step.2: Click “Yes” to load the original 95128/95256 EEPROM data.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-15

Save the service schema data and prepare to write to the BDC.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-16

Write the newly-saved service EEPROM data into 95128/95256 chip.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-17

Step 3: please confirm following 2 steps are finished:

  1. Saved the code and write into the Service EEPROM data.
  2. Restored FEM/BDC system, supply power and connect to OBD.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-18

Save the service schema data and prepare to write to the BDC.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-19

Load the service schema data and write data using the VVDI PRO adapter (If the write is unsuccessful, please try again.)

Read the data again and compare it to the previous data.

Again connect to VVDI2 key programmer

Program BDC.

 

Step 4:

  1. Remove FEM/BDC module shell, write the original EEPROM (that is read out in step.2) into 95128/95256 chip.
  2. Restore FEM/BDC system, supply power and connect to OBD.

Click on “Ok” to continue.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-20

Step 5: Restore coding.

Load coding file read in step 1, write to FEM/BDC via OBDII, finish FEM/BDC programming.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-21

Restore coding success, prepare match key.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-22

Back to select the location of the key and prepare to match.

Ignition switch: No key.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-23

Because FEM/BDC all key lost. Using special Programmer to read the engine data and records ISN.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-24

VVDI Programmer can only read a part of engine data, for the other parts of engine data it is supposed to need special programmers to read (for example: MAGPro2-x17 Programmer).

After the engine data is read out, you can calculate the ISN code via the engine data.

Take photo of ISN code for the next-step key programming.

Vvdi pro adapter and vvdi2 program bmw bdc all key lost-25

 

Back to Xhorse VVDI2 to generate dealer key with the ISN.

 

Back to click on “Get key Info” and you can see the ignition switch: KEY8, that means the Xhorse VVDI2 successfully generate dealer key with the help of VVDI programmer and MAGPro2-x17.

 

That’s all.

Thanks Xhorse engineers” hard work and thanks www.obdii365.com provide the original Xhorse tools.

How to use CGDI Prog MB to add Mercedes BE Key

2017 new CGDI Prog MB is the fastest key programming tool to calculate Mercedes password and add key at present. Here is the user manual of CGDI MB key programmer.

cgdi-mb

Main Function:

1.Add a MB key or do all key lost: support models including 211,209,204,207,212,166,246,197,172,164+, 216

2. Fastest Benz Car key add: collection time 1’50s, password calculation time 40s, 99% get password for one time calculator

 

Workable Benz Car Model:
Mercedes-Benz A series (2004 -)
Mercedes-Benz B series (2005-)
Mercedes-Benz C Series (2001 – , including 210)
Mercedes-Benz E Series (2001-, including 203)
Mercedes-Benz CL series (2001-)
Mercedes-Benz GLK (2004-)
Mercedes-Benz ML series (2003 -)
Mercedes-Benz R series  (2003 -)
Mercedes-Benz G series (2003 -)
Mercedes-Benz S Series (2001 -, including 220)
Mercedes-Benz SLK  (2003- )
Mercedes-Benz SLS (2004 -)
Mercedes-Benz Vito (2003-)
Mercedes-Benz Sprinter (2003 -)
Mercedes-Benz Vito (2003 -)

 

EIS/EZS Function:
1). Can read EIS data via OBD, no need to distinguish the EIS/EZS model.
2). Can display the key status and directly disable the key position.
3). Can display EIS Number, can distinguish the Benz model
4). Can display EIS status.
5). Automatically identify EIS model.
6). Automatically identify CAN protocol

Programming Key Features:
1). Automatically identify the basic key information (including how many times you used SSID)
2). Can directly read pin code of BE keys via infrared, can erase BE keys.
3). NEC adapter can write the original Benz smart key and common key.
4). Can write the Benz original key via infrared.
5). Can restore the data of key and EIS with the key password.

Generate the Key Data:
1) Can generate the key data of HC05/908/912/9S12/NEC EIS/EZS
2) Time: 26 seconds
3) Format: 11/ 41/51 (41 format is smart key data)

Infrared Key Function:
1) Can directly read key pin code via infrared on parts of 209/211/220/215 EIS.
2)Can read/write EIS via infrared.

 

CGDI Prog MB Key Programmer User Manual

 

How to use CGDI Prog MB Key Programmer?

Lock (EIS)

cgdi-mb-key-programmer-2

Read EIS data

cgdi-mb-key-programmer-3

Calculate password

Copy key with key

cgdi-mb-key-programmer-4

cgdi-mb-key-programmer-5

Please insert key into EIS and click OK

cgdi-mb-key-programmer-6

Insert the key into the device and click OK

cgdi-prog-mb

cgdi-mb-key-programmer-12

Insert the original car key into the lock

Insert key into the device and wait for collection

Insert the car key into the lock for 10s and remove it

Insert the key into EIS

After 5s, insert the key into EIS

Insert the key into CGDI MB

Save the generated data

cgdi-mb-key-programmer-8

cgdi-mb-key-programmer-9

cgdi-mb-key-programmer-10

cgdi-mb-key-programmer-11

cgdi-mb-key-programmer-12

cgdi-mb-key-programmer-13

cgdi-mb-key-programmer-14

cgdi-mb-key-programmer-15

cgdi-mb-key-programmer-16

Save data

cgdi-mb-key-programmer-17

Upload data

cgdi-mb-key-programmer-18

cgdi-mb-key-programmer-19

Query Result

cgdi-mb-key-programmer-21

cgdi-mb-key-programmer-22

Query end

cgdi-mb-key-programmer-23

Calculate password word success. Copy the key pass

cgdi-mb-key-programmer-24

Paste the key password

cgdi-mb-key-programmer-25

Confirm key pass and Save EIS data

cgdi-mb-key-programmer-26

cgdi-mb-key-programmer-27

Save EIS data file successfully, click OK

Click Generate EE

cgdi-mb-key-programmer-28

Load EIS File

cgdi-mb-key-programmer-29

cgdi-mb-key-programmer-30

Generate Key File

cgdi-mb-key-programmer-31

Load EIS file and confirm key password

cgdi-mb-key-programmer-32

Save

cgdi-mb-key-programmer-33

Read/Write key

Click OK to confirm

cgdi-mb-key-programmer-34

Write BE key: select communication mode: Infrared

(NEC adapter: used for writing original  key, including smart key. Method: remove the chip to weld)

cgdi-mb-key-programmer-35

Read key/chip

Open/Write (insert the key into devices before click)

cgdi-mb-key-programmer-36

CGDI MB shows NEC adapter, ignore it

cgdi-mb-key-programmer-37

Smart key please choose 41 format, common key and BE key please choose 51 format.

cgdi-mb-key-programmer-38

select location to write key

cgdi-mb-key-programmer-39

cgdi-mb-key-programmer-40

Write key success

cgdi-mb-key-programmer-41

Password display area. Manually write down the password.

BE key read password directly, no need collect data.

http://www.obdii365.com/producttags/cgdi-prog.html

OBDSTAR X300 DP vs. Xtool X-100 Pad2 Full Version

“Hello. I need a advice regarding the two tools Xtool x100 pad2 full and Obdstar x300 DP full. i can not decide myself which one to choose. both of them got almost same function,but i don”t know which one does what says. so please someone who own them or who works with them can light me up. i saw that both have function for immo 4 and 5 but they really work. thanks”
Tech support via obdii365.com:
Xtool x100 pad2 full and Obdstar x300 DP (key master dp) full mainly differs in functions and hardware specification. You can refer to charts below. Hope it helps you out.
Obdstar X300 DP Full vs Xtool X100 PAD2 Full
Function comparison:
  OBDSTAR X300 DP Full XTOOL X100 PAD2 Full
image  
 
OBDII Diagnosis Yes, for ALL systems
OBDII + Diagnosis (Japanese and Korean cars)
Yes, for FOUR systems only
Immobilizer Yes Yes
DPF PIN Code Reading  No Yes
Odometer Adjustment
(change km via OBD)
Yes Yes
EEPROM/PIC Adapter Yes No
EPB Yes Yes
TPS Yes Yes
TPMS
(Tire Pressure Warning Light Reset)
Yes
Yes
SRS Reset Yes No
EPB Yes No
Steering Angle Calibration Yes Yes
CVT Learning/Value Reset Yes No
Oil Reset/
Engine Oil Light Reset
Yes Yes
Battery Reset Yes Yes
Diesel Particulate Filter Yes No
Hexadcimal Editor
(Win Hex)
No Yes
Timing Belt Light Reset
(Manual Operation)
No Yes
Pincode inquiry 7*24 hours automatic inquiry is available for most pin code Manual inquiry
VAG 4th & 5th Immo Key Programmer Require OBDSTAR RFID Adapter (need purchase alone) Require Xtool KC100 adapter (full version comes in default)
Hardware comparison:
  OBDSTAR X300 DP XTOOL X-100 PAD 2
Operating System Android 5.1 Android 4.4
CPU Samsung Exynos4418 A9 industrial-grade processor Rockchip civil-grade processor
Storage space FLASH 16G FLASH 16G
RAM 2G 1G
Battery 7400mAh 4000mAh
Resolution 1280*800 1024*768
Screen size 7 inch 8 inch
HDMI Yes Yes
Bluetooth Yes No
WIFI Yes Yes
Dimension 215*147*30 240*177*24
Shell Three proofing and industrial-grade shell with rubber coating Civil-grade
One key update Yes Yes
One key enter Yes No
Language English, simplified Chinese, traditional Chinese French, Arabic, Spanish, Persian, German, Russian, Portuguese
Database Built-in database Optional, pay extra
Technical support Expert service team Expert service team
Price in obdii365 US$899 US$888

Conclusion:
OBDSTAR X300 DP is superior to XTOOL X100 PAD 2 in many aspects, such as functions and hardware, but X300 DP supports Chinese and English only.
Functions:
1). X300 DP supports more functions, full-system diagnosis and no need to inquiry pin code.
X100 PAD 2 supports four-system diagnosis only and does not support Bluetooth & One Key Enter functions and need inquiry manually.
2). Both support VAG 4th and 5th generation immo key programming function. X300 DP full requires to purchase an extra RFID adapter. Xtool X100 Pad 2 requires a KC100 adapter as well, but it is already included in the package.
Hardware:
X300 DP obdstar has faster CPU, bigger RAM, long lasting battery and higher resolution.
http://blog.obdii365.com/2017/09/14/obdstar-x300-dp-full-vs-xtool-x100-pad2-full/

Xhorse VVDI2 Read BMW CAS3+ ISN Code via OBD

Here is little tutorial on getting ISN from BMW CAS3+ encrypted file with Xhorse VVDI2 BMW key programmer for all keys lost.

 

 

Tool required:

VVDI Prog or R270 programmer (Read CAS3+ encrypted file)

VVDI2 BMW with latest software version (read ISN)

Tango key programmer (program key)

 

Guide:

Open VVDI2 software, select Auto Detect

Select Key Learn tab-> File Make Key

vvdi2-get-isn-from-cas3-1

Select CAS3+ (0L15Y,0M23S)

vvdi2-get-isn-from-cas3-2

Click Load EEPROM dump file

upload dump read by VVDI programmer

VVDI2 will display vehicle information, VIN, KM, key cutting code etc

vvdi2-get-isn-from-cas3-3

Select Key position: KeyID1

Click on Make Dealer Key

vvdi2-get-isn-from-cas3-4

Select “Use try start method to start engine, no need working key or original dump file”, click on Next

Xhorse VVDI2 prompts lost all working key you will gave 64 attempts, do you want to continue, click on YES

vvdi2-get-isn-from-cas3-5

Do you already make new key at key 1?
If already made new key (Already saved new EEPROM dump), press YES

Please use current key to start the engine, if start success press YES, else No
If cannot start engine, please take out the key and insert to programmer before press NO
Is the engine start now?

Click Yes to continue

vvdi2-get-isn-from-cas3-6

Then VVDI2 BMW will display CAS3+ ISN, copy the ISN code

 

Open Tango transponder key programmer software

tango-isn-from-cas3-1

Select Car Model->BMW->Cars->CAS 1-3

Click on upload dump icon to load the eeprom dump

tango-isn-from-cas3-2

CAS3+ Detected

To decrypt data the valid key is necessary or ECU dump

Press OK

tango-isn-from-cas3-3

Select having a key, DME dump or DME ISN. In this situation, we select “I have DME ISN”

Tick OK

tango-isn-from-cas3-4

Paste the ISN got by VVDI2 here

tango-isn-from-cas3-5

Press OK

Program transponder with tango.

tango-isn-from-cas3-6

Done!

http://www.obdii365.com/wholesale/brand-xhorse/

CGDI Prog read BMW CAS ISN Code by OBD

Here is the easy steps to read BMW CAS3 ISN by using CGDI Prog BMW MSV80 key programmer via OBD.

 

Procedure:

Connect CGDI Prog key programmer with laptop and vehicle (shown as picture below)

cgdi-prog-read-dme-isn

Open CGDI Prog software on desktop

Select BMW Read DME ISN function

cgdi-prog-read-dme-isn-1

cgdi-prog-read-dme-isn-2

Click on Read CAS ISN

cgdi-prog-read-dme-isn-3

Reading data

Please remove the key from the ignition

cgdi-prog-read-dme-isn-4

The CAS ISN data was read successfully.

 

Related article:

How to use CGDI Prog to Program BMW CAS3 key by OBD

http://blog.obdii365.com/2017/09/05/cgdi-prog-read-bmw-cas3-isn-by-obd/

OBDSTAR Tools Mercedes Odometer Reset Car List

Good News!!! OBDSTAR X300M mileage programmer, OBDSTAR X300 Pro3/Key Master key programmer and OBDSTAR X300 DP/Key Master DP tablet update Mercedes-Benz odometer reset function.

A series    W169 W176
B series     W245 W246
C series     W204 W203 (2007.04-)
E series     W211 W212 A207 (E-CABRIO)
G series    W463
S series    W211   C216
ML series      W166
SL series        R231
CLA series     W117
CLK series     W209   C207 (E-COUPE)
CLS series     W218
GLK series    X204
SLK series     R171   R172
SLC  series    R197
obdstar-mercedes-odometer-reset

OBDSTAR Tools Update Announcement on July 31st, 2017

1. Odometer Reset:
Solve NEC 95320 MM dash board type odometer reset function defects
Solve NEC 24C64_VDO dash board type odometer reset function defects
Solve Sagitar (2007-2010) CDC24C32 dash board type odometer reset function defects
Solve NEC24C32 dash board type odometer reset defects
Solve W251, W164 odometer reset defects
Solve the following models odometer reset function
Crown Victoria (2005 -), E250 (2008-2009), E350 (2008-2009), E450 (2008-2009), Escape (2008-2012),
Explorer (2004), F150 (2006-2007) F250 (2006-2007), F350 (2006-2007), F450 (2006-2007),
F500 (2006-2007), F550 (2006-2008), Five Hundred (500)) Flex (2008-2012), Focus (2005-2008),
Freestar (2006 -), Freestyle (2005-), Merc Mariner (2008 -), Town car (2005-),Taurus (2008-2009, 2004)
2. IMMO Remote Control Programming:
Issued VW Touareg IMMO
Issued Audi A6/A7/A8 IMMO optimization
Issued Audi Q5/A4L generation 5
Optimize Ford Ranger, transit (Transit) IMMO programming (BUG:1337, BUG:1338)
Adding the IMMO system ISO type
3. Diagnostic Models:
Adding Renault new models:
ALASKAN\AVANTIME\CAPTUR/KAPTUR BR/IN/RU\CAPTUR/QM3/KABIN\CLIO II PH6\CLIO II\CLIO III\CLIO IV\CLIO V6 PH2\CLIO V6
CLIOIIP2/3/4\DOKKER/KANGOO\DUSTER PH2\DUSTER\ESPACE IV\ESPACE V\ESPACE\ESPACEIV PH2/3/4\KADJAR CN\KADJAR\KANGOO II,ect.
Adding Daxia new models:
1304_PK_1_POINT_9D\1304_DS_1_POINT_9D\1305_PK_1_POINT_9D\1305_DS_1_POINT_9D\D_POINT__CAB1_POINT_9D\SUPERNOVA
SOLENZA\LOGAN\SANDERO\DUSTER\LODGY\DOKKER,ect.
Adding Renault – Samsung new models:
CAPTUR_QM3_KABIN\CLIO_IV\KOLEOS_II_CN_QM6_CN\KOLEOS_II_QM6\KOLEOS_QM5\LATITUDE_SM5\MEGANE_IV_SEDAN\NEW_SM3_FLUENCE_MEGANE
SAFRANE2_Point_0_SM5_DF\SAFRANE_2_Point_3_SM7_LF\SCALA_SM3_CF,ect.
Adding Mercedes-Benz new models:
CLK-series\E/CLS-series\CLS-series\S/CL/Maybach- series\CL- series\SL/SLR/SLK- series\SLR- series\SLK- series\M/G/GL/GLK- Series\M-series\G-series
GL-series\R-series,ect.
Adding Maybach new models:
240.078 MAYBACH 57\240.079 MAYBACH 57S\240.077 MAYBACH 57 S\240.178 MAYBACH 62\240.179 MAYBACH 62S/R\240.177 MAYBACH 62 S,etc.
4. optimization
Optimize VW reset airbag
Optimize VW throttle
Optimize B30 VIN all 00 flashback (1334)
Optimize VW oil/service reset
Optimize VW steering angle reset
Optimize VW EPB
Optimize VW battery matching
Optimization software (to solve the problem of DP device can not be tested)
First Issue FR language
Solve the error and content returns problem when diagnostic device enters the connection detection
Solve the multiple content coverage APP crash problem
Solve the APP crash problem during software update in Thai language
Solve the VCI.BIN failed to load when double click the diagnostic models list
Remove the password operation to clear fault code
PASU version adds ALTO 800 ID46 (Blank) IMMO system
Optimize Buick Royaum key programming
Optimize Chevrolet Koros
Optimize the Bluetooth communication of Audi Q7, A6L generation 4 (EEPROM backup)
Optimize NEC 24C64 read IMMO data algorithm
Optimize Transit IMMO system (BUG: 1302)
Solve the system entry failure of Corolla – 06 / 2004-> / Avensis – <- 04/2005 / LEXUS – Gs430
Optimized 510 smart key programming function security verification
Key Programming
Adding 310 Wagon smart key system function support
Added DX3 smart key programming function
Addingd Roewe ERX5, I6 smart key programming
Added Roewe 360 smart key programming
Added KWIND model key programming function
5. Injector Code
Adding injector code function new models
Audi
Automatic scanning
Manual selection
A1
A2
A3
A4
A5
A6
A7
A8
CABRIO
Q3
Q5
Q7
R8
RS3
RS5
S2
S3
S5
TT
TTRS
TTS
Chrysler
Automatic scanning
Manual selection
Cherokee (free light)
2014
2015
Ram 3500 Pickup
2011
2012
Ram 4500/5500
2011
2012
Town & Country
2011
300/Magnum/Charger
2006
2007
2008
2009
2010
Challenger
2008
2009
2010
Commander
2006
2007
2008
2009
2010
Grand Cherokee
2005
2006
2007
2008
2009
2010
Wrangler (Export)
2008
2009
2010
http://blog.obdii365.com/2017/08/30/obdstar-x300-dp-adds-mercedes-odometer-correction/

OBDSTAR X300 DP Program VW Touareg 2011 All Key Lost

Guide to program dealer key on VW Touareg 2011 5th generation immobilizer when all keys lost by using OBDSTAR X300 DP (Key Master DP) tablet key programmer and RFID VAG 4th & 5th immo programming adapter.
Procedure:
Well connect OBDSTAR X300 DP and RFID adapter, VCI adapter with vehicle
Select Diag Program->VW/AUDI/SKODA/SEAT->VW/AUDI/SKODA/SEAT 33.03
Please connect VCI to main unit by USB to keep stability of vehicle communication
obdstar-x300-dp-VW-touareg-1
obdstar-x300-dp-VW-touareg-2
obdstar-x300-dp-VW-touareg-3
Select VW->Program Keys->5 generation immo
obdstar-x300-dp-VW-touareg-4
obdstar-x300-dp-VW-touareg-5
obdstar-x300-dp-VW-touareg-6
First update OBDSTAR RFID adapter to latest version. If X300 DP tablet shows the hardware has been the latest version.  Press OK to go back.
obdstar-x300-dp-VW-touareg-7
obdstar-x300-dp-VW-touareg-8
Select 5th immo New Touareg->Read Immo Data
obdstar-x300-dp-VW-touareg-9
obdstar-x300-dp-VW-touareg-10
Switch ignition on
If all key lost, please turn on the headlight and depress brake, then press (ENT) to continue
communicating
Reading immo data…
Save immo data as BIN format, e.g “KKKKKKKK.BIN”
obdstar-x300-dp-VW-touareg-11
Press OK to confirm
Select Show IMMO Data
Select bin file just saved
OBDSTAR X300 DP key programmer will display VIN, key number etc information
obdstar-x300-dp-VW-touareg-12
obdstar-x300-dp-VW-touareg-13
Select Make Dealer Key and bin file
obdstar-x300-dp-VW-touareg-14
Put a valid key into RFID and make sure the key is effective,  otherwise, the programmed key is unable to start the vehicle
Press YES to continue
obdstar-x300-dp-VW-touareg-15
obdstar-x300-dp-VW-touareg-16
After insert first key, the RFID indicator will flash. Then insert second valid key
obdstar-x300-dp-VW-touareg-17
Written success
obdstar-x300-dp-VW-touareg-18
Select Program Keys and choose bin file
obdstar-x300-dp-VW-touareg-19
Note: After recognized by vehicle, the key will be locked and unable to unlock. Continue to go on?
Press YES to continue
obdstar-x300-dp-VW-touareg-20
Enter key number to be programmed: 2
Press OK
Please turn ignition on, Press ENT to continue
Press OK
obdstar-x300-dp-VW-touareg-21
Insert new key orderly and turn on ignition switch for smart system, aim backside of key to the key identification mark area and turn OFF->ON to recognize key
(1/2)
obdstar-x300-dp-VW-touareg-22
succeed to recognize key
obdstar-x300-dp-VW-touareg-23
key learning mode is ending
obdstar-x300-dp-VW-touareg-24
Learn success
Test the new key.
Done!

How to use SKP1000 to add Kia Sorento 2014 Smart key

Guide to add a smart key on Kia Sorento 2014 with SKP1000 key programmer by OBD.

 

Key information:

Original key: 3-button smart key

Frequency: 433MHz

Chip: 47 chip

Start: One button Start-stop

Slot: Without slot

Pin Code: calculate by VIN

Device: SKP1000 Tablet car key programmer

 

Procedure:

Connect SKP-1000 with vehicle via OBD diagnostic socket

Turn ignition ON

Go to Immobilizer function and select Kia brand

skp1000-Kia-Sorento-1

Select Smart key

skp1000-Kia-Sorento-2

Select By System

skp1000-Kia-Sorento-3

Select Smart System 6 (New type without slot)

skp1000-Kia-Sorento-4

Select Without slot

skp1000-Kia-Sorento-5

Choose OBDII Connector

Turn ignition switch to OFF position

skp1000-Kia-Sorento-6

Open and close the door before communication

skp1000-Kia-Sorento-7

SKP1000 auto key programmer will prompt to enter 6-digit pin code

skp1000-Kia-Sorento-8

Press on the Start button with original smart key vertically within 5 seconds

Press YES to continue

skp1000-Kia-Sorento-9

Programming…

Press on the Start button with the smart key vertically

skp1000-Kia-Sorento-10

Register smart key success. Continue to program next key?

Press YES to continue

skp1000-Kia-Sorento-11

Press on the Start button with a new smart key vertically within 5 seconds

skp1000-Kia-Sorento-12

Program key success!

Press NO to go back

skp1000-Kia-Sorento-13

Test the new smart key.

skp1000-Kia-Sorento-14

Done!

http://www.skp1000.org/

How to Unlock BMW F-series Smart Key with Yanhua DR Key Adapter

Guide to unlock BMW F-series used smart remote key with Yanhua CKM100 car key master.

unlock-bmw-f-series-smart-card-1

Device needed:

working key

Yanhua CKM100 or Digimaster III/Digimaster 3

DR Key adapter to reset/unlock

 

Reset/Unlock BMW F-series smart key card:

unlock-bmw-f-series-smart-card-2

Update CKM100 to the latest version.

Select Programmer function

Choose Key Data Reset

unlock-bmw-f-series-smart-card-3

Select car brand: BMW

unlock-bmw-f-series-smart-card-4

Select BMW F-series remote

Choose the correct remote frequency and type: 315MHz (HUF5662)

You can check the frequency & type on the back of the remote key)

unlock-bmw-f-series-smart-card-5

unlock-bmw-f-series-smart-card-6

unlock-bmw-f-series-smart-card-7

Follow CKM100 prompt to connect Yanhua DR Key adapter with key board

Click Next

unlock-bmw-f-series-smart-card-8

unlock-bmw-f-series-smart-card-9

Connect DR-Key adapter with CKM100 car key master main unit

click YES to continue

unlock-bmw-f-series-smart-card-10

Transferring key data

unlock-bmw-f-series-smart-card-11

Reset/Unlock key in progress

unlock-bmw-f-series-smart-card-12

BMW F-series key data reset and unlock success.

unlock-bmw-f-series-smart-card-13

Done!

 

 

FYI: Yanhua DR Key adapter

yanhua-dr-key-adapter

DR-Key adapter Feature:
Erase / Reset the written key and achieve repetitive reading and writing key.
(Note: the genuine keys are all disposable and all the written genuine keys were locked.)

Support models:
1, BMW E Series,F Series genuine keys /aftermarket key Unlocking / Reset
2, Audi five generation / Land Rover / Porsche key Unlocking / Reset
3, Hyundai / KIA smart card key Unlocking / Reset
4, Dodge / Jeep / Chrysler key Unlocking / Reset
5, Buick / Cadillac / Chevrolet / GM / Opel key Unlocking / Reset
6, MITSUBISHI / Volvo key Unlocking / Reset
7, Peugeot Citroen key Unlocking / Reset
8, Renault key Unlocking / Reset

Support device: Yanhua Digimaster III and CKM100

Yanhua DR-Key Adapter Unlocking / Reset key car models list

Car model PCB mainboard no./frequency/key No.
Audi PCB mainboard no:233.453.111-02 315MHz-8T0959754A
315MHz-8T0959754C
315MHz-8T0959754J
PCB mainboard no:233.453.111-05(06) 315MHz-4G0959754G
315MHz-4G0959754J
315MHz-4H0959754G
315MHz-4H0959754J
315MHz-8T0959754A
315MHz-8T0959754C
315MHz-8T0959754G
315MHz-8T0959754J
433MHz-8T0959754
868MHz-4G0959754K
868MHz-4H0959754K
868MHz-8T0959754D
PCB mainboard no:233.453.211-01(02) 315MHz-4G0959754J
315MHz-8H0959754DB
315MHz-8K0959754
315MHz-8K0959754C
315MHz-8K0959754G
PCB mainboard no:233.628.011-03 433MHz-7P6959754AF
868MHz-7P6959754L
PCB mainboard no:233.628.011-04 315MHz-7P6959754AR
433MHz-7P6959754AO
PCB mainboard no:233.628.021-02 868MHz-7P6959754AT
BMW E series chassis Aftermarket key
genuine key 315
genuine key 868
F series chassis 315MHz-5WK49663
315MHz-HUF5662
433MHz-5WK49662
433MHz-HUF5663
433MHz-HUF5767
868MHz-5WK49661
868MHz-HUF5661
Porsche 315MHz-7PP959753BM
433MHz-7PP959753AJ
433MHz-7PP959753BN
433MHz-7PP959753BQ
433MHz-7PP959753BS
Land Rover 315MHz-YWX000071
433MHz-5E0U40247
433MHz-YWX000061
Volvo 900MHz-5WK49266
Buick 315MHz-4 button-13500225/13584825
315MHz-5 button-13500224/13584825
Chevrolet 315MHz-4 button-13500222
315MHz-4 button-13500318/13584828
315MHz-5 button-13500221
315MHz-5 button-13500319/13584829
433MHz-2 button-13500218
Cadillac 315MHz-5 button-NBG009768T
GM 433MHz-3 button
433MHz-4 button
433MHz-5 button
Opel 433MHz-2 button-13149645
433MHz-2 button-13149658
433MHz-2 button-13188281
433MHz-2 button-13188284
433MHz-2 button-13500235
433MHz-3 button-13500234
Peugeot  Citroen 21676652
E25CI009
E28CI01B
E33CI002
Hyundai  KIA CMFCH02
CMFEU03
HMFEU04
HMFKR04
HMFNA04
Mitsubishi 433MHz-G8D-644M
Renault 433MHz-285971998R
433MHz-285974100R
433MHz-285975779R
433MHz-805673071R
Dodge    Jeep   Chrysler 567.737.061
567.783.031
KOBOTO4A
M3N5WY72XX
M3N5WY783X
OHT692427AA
OHT692713AA

Obdstar F102 Nissan convert BCM pin code of Sylphy 2008

Obdstar F102 works perfect as a Nissan PIN CODE reader, 20 digit calculator, BCM coder converter. Here, it’s a how-to’s of working Obdstar F102 as a Nissan BCM pin code converter.
Nissan Sylphy 2008
Nissan Sylphy 2008 specification:
Manufacturer : Nissan Japan
Car Name : sylphy bluebird
Model : 2008
Registration : 2010.
Serial : 27.
Engine : 4 Cylinder VVTI
Engine Capacity : 1500 cc
Transmission : auto
Fuel System : Octane(Never Run by CNG)
How to convert BCM code using F102 Obdstar:
Connect Obdstar f102 pin code reader to the OBD port
Ignition on
OBDSTAR-F102-Nissan-Sylphy-1
Power on the device
OBDSTAR-F102-Nissan-Sylphy-2
Select FUNCTION
OBDSTAR-F102-Nissan-Sylphy-3
IMMOBILISER
OBDSTAR-F102-Nissan-Sylphy-4
Select NISSAN/INFINITI V31.16
This is pin code reader software
OBDSTAR-F102-Nissan-Sylphy-5
Loading software, initializing, authorizing
OBDSTAR-F102-Nissan-Sylphy-6
OBDSTAR-F102-Nissan-Sylphy-7
OBDSTAR-F102-Nissan-Sylphy-8
PINCODE Calculator
OBDSTAR-F102-Nissan-Sylphy-9
BCM No.
OBDSTAR-F102-Nissan-Sylphy-10
Switch ignition off
OBDSTAR-F102-Nissan-Sylphy-11
BMC within the code: 2386D
OBDSTAR-F102-Nissan-Sylphy-12
Old PINCODE: 9393
New PINCODE: 3060
OBDSTAR-F102-Nissan-Sylphy-13
OBDSTAR-F102-Nissan-Sylphy-14
OBDSTAR-F102-Nissan-Sylphy-15
BCM code conversion success!
Obdstar F102 works great as a bcm code reader& converter.
Theme: Fresh Print by BlogBaker. Powered by BlogBaker.