Posts tagged with "bmw icom next"

BMW ICOM A2 vs. ICOM Next vs. INPA vs. E-sys

Any cost-effective DIY solution of BMW diagnostic/coding/programming?

Yes, first you should know which a BMW ICOM cable you need: K+DCAN or ENET or ICOM A2/ ICOM Next.

  INPA K+DCAN cable

 

(switch mode)

BMW ENET cable BMW ICOM

 

(ICOM A2ICOM Next)

Image  bmw-enet-esys  bmw-inpa-k-can-cable bmw-icom-next-wifi
Price $17.99 $11.99 $300 around
Vehicle For Exx cars For Fxx cars For ALL Exx & Fxx cars

 

(BMW E, F, G, I, Alpina series cars, MINI and Rolls-Royce from 1985 – 2017)

Software Inpa 5.0.2

 

Ediabas

E sys 3.23.4

 

Psdzdata

Ista-D

 

Ista-P

BMW ETK
BMW KSD
INPA

NCS Expert

WinKFP

E-Sys 3.27.1

BMW AiCoder

BMW FSC code generator

Diagnostic Yes Yes Yes
Coding Yes Yes Yes
Programming No Yes Yes


In summary,

It depends on your purpose (diagnostic or coding or programming) and model (Exx or Fxx or others).

 

For Coding, you need different Tools, NCS Expert / SP-Daten for E-Series and E-Sys / PSdZData for F-Series.

All Diagnosis and Coding can be done with cheap DCAN Cable for E-Series and cheap ENET Cable for F-Series.

 

For Programming (Flashing ECU’s with new Firmware), then you need ISTA/P for for both E-Series and F-Series cars, or you can use WinKFP for E-Series and E-Sys for F-Series. For E-Series Programming, you will need an ICOM, but for F-Series Programming, you can use ENET Cable.

 

For Exx- Series:

Interface = K+DCAN Cable (OBDII to USB) or ICOM

ECU Data Files = SP-Daten

NCS Expert = Coding Software

WinKFP = Programming (Flashing) Software

EDIABAS = Low-Level ECU Communication Software used by NCS Expert & WinKFP

 

For Fxx- / Ixx- / Gxx-Series, Mini, & Rolls-Royce:

Interface = ENET Cable (OBDII to RJ45 Ethernet) or ICOM

ECU Data Files = PSdZData

E-Sys = Coding Software

E-Sys = Programming (Flashing) Software

 

About: BMW ICOM

ICOM A (also ICOM A2, ICOM A3, ICOM Next A): main interface

ICOM B: adapter for programming multimedia in E series

ICOM C: adapter for old BMW with round 20 pin diagnostic plug

ICOM D: adapter for motorcycles

ISTA+ (AKA Rheingold or ISTA-D)

DIAGNOSTICS for All Vehicles

PROGRAMMING for F/I/G/RR & MINI, but requires an ICOM

ISTA-P

PROGRAMMING traditionally for all chassis, but is being phased out by August 2017, except for legacy E-series.

Replacement ECU’s must be NEW

 

YOU HAVE TO KNOW before you buy ICOM A2 or ICOM A3 or ICOM Next:

 

BMW ICOM NEXT vs the old ICOM

-> much faster in BMW F and G series ..

-> supports gigabit Ethernet too to be future proof, there currently is not gigabit Ethernet protocol defined yet for autos. Also it has USB3.0 instead of USB2.0 and a better wifi card. 

 

 

ICOM NEXT A vs ICOM A2

 

-> more stable during programming

-> be necessary for the future Gbit cars

-> faster start-up times and high throughput

-> through high-performance,low-power ARM SoC

-> improved handling

-> more flexible OBD cable

-> lighted button for logs

 

ICOM A vs ICOM A2 vs ICOM A3

 

Modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity. And robust aluminium case will help to avoid damage when using in harsh environments. It works better in cooling, runs faster and works more stable, not easier broken than older ICOM A.

 

ICOM A3 can program all units for all BMW series expect media system, and work more stable and has stronger compatibility than ICOM A2, A1.

How to install and use BMW Dr.gini B020 software

Dr.gini B020 BMW diagnostic software is a new program released as BMW ICOM software and tested OK to work perfect with a communication interface (BMW ICOM, BMW ICOM NextBMW ENET cable, PASSTHRU or INPA K+DCAN cable).
Dr gini BMW download FREE: Unknown security
or
Dr gini BMW download: Tested OK
dr-gini 
How to install Dr.gini – b020:
Step 1: install EDIABAS.
Run the EDIABAS _7.3.0.msi in the EDIABAS folder to install the EDIABAS
Do not change any setting during installation.
Step 2: install Dr.Gini
Unpack the “Setup Dr.Gini B014 EN.zip” to run and install
Note: the setup is not completed
Step 3: files replacements in EDIABAS
Copy extracted files in the ECU folder to the ECU folder where EDIABAS program is installed
Step 4: Copy the EDIABAS.INI in”INTERFACES/ENET Ediabas.INI and overwrite the C:/EDIABAS/BIN folder, as Dr.Gini will be connected by the ENET cable.
Copy the api32.dll file in the “API32.DLL” folder to:
For Windows 7/8/8.1 / 10 64-bit:
C:/Windows/SysWOW64
For Windows 7/8/8.1 / 10 32-bit :
C:/Windows/System32
Step 5: Copy the Gini_B020.exe file to C:/EDIABAS/BIN.
Sometimes, Gini_B020.exe is recognized as a malicious program and may be removed from an anti-virus program. If you feel that this process is unstable, you can just delete this file.
Dr.gini – b020 installation completes.!
How to use Dr gini BMW:
Dr.Gini – Interface Configurator (ICOM, ENET, K+DCAN, PASSTHRU)
Discover & manage up to 3x ICOM interfaces
Dr.gini-b020-manual-1
Dr.gini-b020-manual-2
Dr.gini-b020-manual-3
Dr.gini-b020-manual-4
Dr.Gini – Register a Battery (E series) – Expert
Dr.gini-b020-manual-5
Dr.Gini – How fast you can read and display the engine analog values:
Petrol Engine: 21 gauges updated each 9ms approx.
Dr.gini-b020-manual-6
Diesel Engine: 22 gauges updated each 8ms approx.
Dr.gini-b020-manual-7
If your gauges are slow, it’s probably because of your communication interface
Dr.Gini – Reset Driver Side Window – Expert
Ecu: D_KBM
Job: STEUERN_FENSTERHEBER_DENORMIEREN
Argument: 11
–> Run Job
Dr.gini-b020-manual-8
Attention:
the driver’s window will open and close itself !
Ecu: D_KBM
Job: STEUERN_FENSTERHEBER_EINLERNEN
Argument: 11
–> Run Job
Dr.gini-b020-manual-9
25th December 2016… Save the date…
Dr.gini-b020-manual-10
Dr.gini-b020-manual-11
Dr.gini-b020-manual-12
Dr.gini-b020-manual-13
Dr.Gini B021 – What’s new in Basic version?
Dr.gini-b020-manual-15
  1. FSC read and write for E series
    –> enter Ecu Address, then press Status to get started
  2. Maps Code generator
    –> drag and drop FSC in the Textbox to get started
  3.  Dashboard controls
  4.  Footwell Module Reset counter

http://blog.obdii365.com/2017/08/01/dr-gini-b020-bmw-manual/

Register BMW 7 series Battery with INPA and Toolset32

The battery needs to be registered when you replace it on BMW 7 series (5 series, 6 series etc). Here is the guide to show you how to register new battery with INPA or Ediabas toolset32.

Note: This is just for REGISTERING THE SAME SIZE BATTERY. You are at your risk.

First with BMW INPA software:

inpa-register-battery-1
inpa-register-battery-2
inpa-register-battery-3
inpa-register-battery-4
inpa-register-battery-success


With Ediabas toolset32:

ediabas-register-battery-1
ediabas-register-battery-2


first go to file then click F3 then select POW_E65.prg

in the second pic double click the command (steuern_batterietausch_registrieren) just ones and you are done .

remember this is for registering the same size battery not for retrofitting another size , if you want to retrofit 90AGM battery you need to register the battery with DIS/ISTA because DIS/ISTA well register only 90AGM battery , if you want to retrofit another battery size you have to use NCS expert.


FAQ about register BMW battery:
Q: We always used inpa. Should i use both or registering with inpa is enough
A: registering ones is enough , some ppl have problem with INPA registering there battery so i put toolset32 .

Q:  what is this battery thing ( registration ) with what? the car computer ?
So if you take out the battery and say get a sears diehard gold . what happens can someone
explain . will another battery work ( doesn't it just see a 12 volt power supply?

A:You need AGM battery. It must be registered. Otherwise it wont charge properly. Our cars are very sensitive. If your battery is low or doesn't get charged properly u will get different errors and faults. Your car need to know how it needs to charge battery thats why u need to register it. You can go to dealer, or u can set up bmw tools and do it yourself.


Q: Where do i get the software and cables to register my battery??
A: BMW ICOM Next or BMW ICOM A2 with ISTA and engineering software INPA, Ediabas, Ncs expert etc. Check here BMW ICOM NEXT A+B+C with V2017.05 Software ISTA-D 4.05.20
 ISTA-P 3.61.4.002 etc. You can also download ista torrent on forums and use with INPA K+DCAN cable. Better go for INPA. If you are not good using software programmers, you can buy Foxwell NT510 BMW multi-system scanner that can be directly plugged into the OBD II port. It is located by the drivers door Behind a little flap near the lower hinge area. It is more expensive but can do more things and is specifically programmed for BMW/Mini.


Q:
The error above should be with INPA (using INPA ) I get "group file: D_POW.SYS-0012: Identification error" with no space between D and : but the system is making it an emoticon.

bmw-inpa-error


A:You might need to Update your Daten files . Better buy newer software package.


www.obdii365.com

V2017.5 BMW ICOM Software What Worked?

V2017.5 BMW ICOM software has been updated to ISTA-D 4.05.20 ISTA-P 3.61.4.002. And here are ISTA-D 4.05.20 ISTA-P 3.61.4.002 on windows 7 reviews… here you go.
05.2017 Bmw ista review 1:
Great Job !!!
and perfect instruction for install.
I personally went for VM WS installation, because portability is a
very important issue for me.
For those run out of diskspace, like me, I suggest to install Ista+ in VMware WS Ver 12x with Win7 x64 Guest. Earlier VMware versions down to
10 probably will work as well. Diskspace need runs to 350 GB. I used 350 GB diskspace on SSD installed in a caddy sitting in DVD slot of an i3 notebook.
ISTA can be working pretty soon,in case You are following the excellent instructibles of spider80 without missing not a one step of instruction.
X86 apps in VM x64 environment like itoolradar arose a java problem, even when I tried to install an outdated x86 Java version.
Mayor Ista+ / ISTA P working like a charm ( i used icom with latest firmware update ). Running ISTA /P requires good charging
equipment with constant additional load otherwise it will quit session . BMW currentliy advices supply > 70A. For older cars like E-series
25A seem to be ok in my opinion.
05.2017 Bmw ista review 2:
v2017-5-bmw-icom-review-1
Installed…. 100% working ….so had to log back in and reply with BIG THANKS to the superb package with excellent step by step install instructions.
Just had two little snags when installing under Win7 x86 …..
1) vcredist_x86 2008.exe download was corrupt …..but easily solved by re-downloading from MicroSh@ft
2) no Java included in download package ….again easily found via Guugle!
Many thanks again Spider80 …..you’ve done an superb job here, with brilliant step by step instructions
…..now I just need to find an BMW ICOM Next interface at reasonable money for all to fully work on latest B’mers!
V2017.5 BMW ICOM review 3:
This is 2017.05 bmw icom software working on my Windows 7. i confirm it’s working.
v2017-5-bmw-icom-review-2
v2017-5-bmw-icom-review-3
v2017-5-bmw-icom-review-4
v2017-5-bmw-icom-review-5
v2017-5-bmw-icom-review-6
ISTA-D 4.05.20 ………Worked!
ISTA-P 3.61.4.002 ………Worked!
INPA ………Worked!
NCS Expert ………Worked!
WinKFP ………Worked!
E-Sys 3.27.1, Psdzdata 59.0 ………Worked!
BMW ETK 2017.05 ………Worked!
BMW KSD 04.2017 ………Worked!
BMW FSC Navigation Code Generator ………Worked!
BMW FSC code generator ………Worked!
BMWAiCoder for BMW Coding  ………Worked!
v2017-5-bmw-icom-etk
v2017-5-bmw-icom-ksd2
http://blog.obdii365.com/2017/06/18/2017-5-bmw-icom-ista-d-ista-p-reviews/

Free BMW ENET E-sys 3.29.0 Psdzdata 3.61.5 and Installation

Latest BMW E-SYS 3.29.0 F-series coding software released here!
Here you can download BMW ESYS 3.29.0 + ESYS Launcher Premium 2.7.1 + Psdzdata V3.61.5 Lite for BMW coding!
Compatible with BMW ENET Cable and ICOM.
Note before you download:
ALL links here are free to all, NO pass!
And also try on your own risk!
E-SYS 3.29.0 setup file Download:
e-sys-3-29
Psdzdata V3.61.5 Lite Download:
psdadata-3-61-5
E-SYS Launcher Premium 2.7.1 Download:
Tips:
  1. You must uninstall the existing E-SYS version before installing new E-SYS 3.29.0.
  2. E-sys Launcher Premium 2.7.1 is tested OK to launch E-SYS 3.28.1, but for E-SYS 3.29.0, haven’t tested, should work.
  3. E-SYS Launcher Premium V2.7.1 require NET Framework 4.5.2 or above.
After download ESYS 3.29.0 Program, what tools you need for BMW Coding?
BMW ENET Cable : Cheapest option for BMW F-series Coding
BMW ICOM: Allow you to fully diagnose and program more than just do coding)
Recommended: BMW ICOM NEXT or ICOM NEXT WIFI. (Next generation of ICOM A2)
bmw-icom-next
Why choose E-Sys Launcher Premium to launch E-Sys software?
E-Sys Launcher Premium allows you to perform FDL coding.
– Increased default memory allocation.
– Enhanced overall System stability.
– Zero E-Sys Configuration.
– Personalized and individualized token.
– Easy-to-use.
Note: With E-Sys Launcher Premium, once “Car Series” is set, it can only be changed every 3 days, so be sure to set it correctly at first!
How to install BMW E-Sys 3.29.0?
(Steps refer to E-Sys 3.26.1 installation)
Extract E-Sys using Winrar. Right click it and click “extract here”.
Run E-Sys_Setup_3_26_1_b42487.exe
Select language, click “Next” then “I accept the agreement” then “Next”.
Click “Browse” to choose where to install E-Sys. The default location is C:\EC-Apps\ESG\E-Sys.
default-installation
Set the data path for E-Sys, the default is C:\Data. Click next until the installation begins.
set-the-data-path
installing
Click “Finish” to complete the basic installation procedure for E-sys.
Then you need to make it work.
You will see two folders, one is a “Patch” the other is “Token Generator”.
token-generator
The patch folder contains 2 files
e-sys-installed
Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)
Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)
Use the Token Software, enter a username as you like and password.

BMW ICOM ISTA-D 4.05.31 ISTA-P 3.61.4 Free on Mega

Good news for sharing: 05.2017 BMW ISTA 4.05.31 is released now!

Here obdii365 again to provide you free download link to BMW ISTA 4.05.31 Standalone+ SQLiteDBs 4.05.30 + ISTA-P 3.61.4.002. Hope it helps!

bmw-ista-4-05-31-sdp-ista-p-download-update-1

bmw-ista-4-05-31-ista-p-3-61-4-download-update-2

Download BMW Rheingold ISTA 4.05.31 Standalone + SQLiteDBs:

https://mega.nz/#!ltY1jDzD!GyaBgKvZ_h3IK5W0zjaZ5cqB7pL8iNdrnTVMRAkm1eQ

bmw-ista-4-05-31-sdp-ista-p-download-package-3

Standalone versions of ISTA-D and ISTA-P.

SQLiteDBs 4.05.30, including RU, EN, DE, OTHER.

Use 7-zip 16.04 or higher to unpack archives.

All installed and ready to work.

Instructions for installation, configuration and solution of possible errors, is located in the Tools folder (FAQ-RU.pdf and FAQ-EN.pdf).

Use Adobe Acrobat Reader DC to view PDF files.

 

(Thanks to Spider80’s sharing! For ISTA-P Loader thanks to beemerboy88.)

Note: Please enjoy this new update at your own risk!

If you are looking for a tested 100% OK version, here V2017.03 BMW ICOM ISTA-D 4.04.12 HDD WIN7 Multi-language is your best choice.

bmw-ista-4-04-12-software-hdd-4

BMW ISTA 4.05.31 Tools Recommended

BMW ICOM A2 WIFI

BMW ICOM A3

BMW ICOM NEXT

BMW INPA K+DCAN Cable

BMW ENET Cable

 

Useful Tips for BMW ISTA 4.05.31 Installation

Recommend to install BMW ISTA in VMware WS V12x with Win7 x64 Guest. Earlier VMware versions down to 10 probably as well.

 

VM WS installation portability is a very important issue.

 

For disk space need runs to 350 GB.

 

X86 apps in VM x64 environment like itoolradar may arose a java problem.

 

Running ISTA /P requires good charging equipment with constant additional load otherwise it will quit session .

BMW currently advices supply > 70A. For older cars like E-series, 25A seem to be ok.

BMW ICOM ISTA-D 4.04.31 ISTA-P 3.61.4 Free on Mega

Here, free download the latest BMW ICOM Next software 05.2017 ISTA-D 4.04.31 ISTA-P 3.61.4 (Expert Mode) and ETK-KSD-RSD
Free download ISTA-P 3.61.4.002 on Mega
– not tested, try on your own risk
ista-d-361
Free download BMW ISTA-D 4.04.31 Standalone + SQLiteDBs EN-DB V4.04.31 + Tool
– not tested, try on your own risk
Download ISTA-D 4.04.12 ISTA-P 3.60.2.001 Windows 7:
– 100% tested, works perfectly with the new ICOM Next and old BMW ICOM
icom-software
bmw-icom-next
ISTA-D 4.04.31 ISTA-P 3.61.4 System requirements:
Operating system
  • Windows 7 (32-bit or 64-bit)
  • Windows 8 or 8.1 (32-bit or 64-bit)
  • Windows 10 (32-bit or 64-bit)
Hardware requirements
  • Processor (CPU): min 2.2 GHz Dual Core or 4.4 GHz Single Core CPU (Summary of Cores or Threads should be more than 4.4 GHz)
  • Memory (RAM): min 4 GB
  • Hard drive (HDD): min 195 GB free space on disk C: before installation
Interface requirements
  • BMW ISPI ISTA+: Genuine or clone ICOM A1, A2 or A3, ICOM Next A, ENET cable, K-Dcan cable
  • BMW ISPI ISTA-P: Genuine or clone ICOM A1, A2 or A3, ICOM Next A,BMW ICOM Next
2017.05 ISTA-D 4.04.31 ISTA-P 3.61.4 Information:
BMW ISTA+ 4.04.31 (also called ISTA, ISTA-D or Rheingold)
  • Module (ECU) errors reading and clearing
  • Gearbox (transmission) and engine adaptations erasing
  • Fuel injectors control, correction amount real time viewing, injector registering
  • Engine mountings testing
  • Mass air flow (MAF) testing and registering. Whole air system testing
  • EGR system control and testing
  • Turbocharger and related components control and testing
  • Diesel particulate filter regeneration (DPF)
  • Battery replacement
  • Oil change and service interval reset
  • Wiring diagrams, live data, repair instructions, technical documents etc
  • Programming, vehicle retrofit, mirror coding, FSC codes adding or updating etc
  • And many more other functions
BMW ISTA-P 3.61.4.002 Multilanguage + Expert Mode (single module programming)
  • Battery type change
  • Module (ECU) software updating, coding and replacement
  • Vehicle retrofitting, options enabling and disabling
  • Choose ISTA-P language directly from ISTA-P taskbar agent
  • And many more other functions
BMW KSD 05.2017 Multilanguage
  • Working/labor hours
  • Technical data
  • Service information
  • Defect codes
  • Service & repair packages
  • Approved wheel/tyre combinations
  • Recommended summer and winter tyres
  • And other functions
BMW RSD 09.2016 Multilanguage
Commercial and technical service data for repair and maintenance of BMW Motorcycles
  • Working/labor hours
  • Technical data for motorcycle
  • Service information
  • Defect codes
  • Description of devices and tools
  • Process of removal, installation of bike parts and mechanisms
  • Service & repair packages
  • Approved wheel/tyre combinations
  • And other functions
ISTA-P 3.60 Car List:
can be dealt with using ISTA/P:
 E Series
 F, G and I series (will be switched off gradually from ISTA/P 3.62.0 on)
F, G, I Series (ISTA 4, ISTA/P)
Series group I level
F001 (F0x, RR4, RR5) F001-17-03-505
F010 (F06, F1x) F010-17-03-505
F020 (F2x, F3x, F80, F82, F83, F87) F020-17-03-505
F025 (F15, F16, F25, F26, F85, F86) F025-17-03-508
F056 (F4x, F5x, F6x) F056-17-03-507
S15A (G1x, G3x, RR1x) S15A-17-03-507
S15C (G38) S15C-17-03-506
I001 (I03, I08) I001-17-03-507
I levels correspond to the ISTA Service Data version on the front page.
E Series (ISTA/P)
Series group I level
E065 (E65, E66) E065-15-07-500
E060 (E60, E61, E63, E64) E060-16-11-500
E070 (E70, E71, E72) E070-16-11-500
E89x (E81, E82, E84, E87, E88, E89, E90, E91, E92, E93) E89x-16-11-500
R056 (R55, R56, R57, R58, R59, R60, R61) R056-17-03-504
RR01 (RR1, RR2, RR3) RR01-17-03-500
ISTA-D 4.04 ISTA-P 3.60 Review:
I have installed it without any problems…
Me to without any error no problem
sometime download from mega file is corrupted and if you download with megadownloader files get corrupted all the time.
try download it again maby that will help.
Also no error here – Working perfect
With me runs very well.

BMW ICOM Next Clone Review Runs Faster

Have some words about my new toy BMW ICOM Next A+B+C diagnostic tool from China.

bmw-icom-next-review-1

I am using 2017.3 bmw software ISTA-D 4.04.12 ISTA-P 3.60.2.001 Windows 7

 

i first went to ICOM Next with my e38. This car was bought new in 2001 and i only have 65k miles on it but the dash was always lit up like a Christmas tree! since day one this car had electrical issues and every time the dealership said they fixed it, the same issue would pop up… the icom next helped me diagnose the problem and fixe it, with 1 hour!!

 

Then, i took my 2014 (f31) 328ix sport wagon, now this was the cool stuff… i had all these special codes to do some really trick stuff to the electronics like using the key fob to close my rear hatch, roll up the windows and sunroof, as well as fold mirrors when i lock the car. all my phone contacts in my heads up display … icom next is really a cool guy, very laid back and not pretentious whatsoever.

 

And, my friends 2011 128i also benefited a lot. It had some electrical issues, causing the radio not to work and the speedometer, RPM, and gas gauge to suddenly drop and rise while driving. After a quick diagnostic test, I needed a new battery and the entertainment computer system had to be recoded. Within a day, all the electrical problems were fixed!!

 

 

In summary,

 

ICOM Next is faster than the old bmw icom. It is also better built IMHO.

And 2017 Next is WIFI available also.

It handles multiprogramming and coding quite nicely.

Gets the job done much faster if flashing the complete vehicle.

 

Another benefit to Next will be compatibility for future cars.

In two or three years there will be a new ICOM released, that will be probably better etc. That’s how things work.

 

So far, I have had the BMW ICOM Next A+B+C no issues.

www.obdii365.com

BMW Rheingold 4.03.31 ISTA-P 3.60 Free Torrent

Here is customer share the newest version of BMW ICOM A2 Rheingold 4.03.31+SDP 4.03.30+ISTA-P 3.60.4.000, thanks to beemerboy88 and spider80, good luck and enjoy it on your own risk!
Standalone versions of ISTA-D and ISTA-P.
SQLiteDBs 4.03.30, including RU, EN, DE, OTHER.
BMW ICOM A2 Rheingold 4.03.31 1
BMW ICOM A2 Rheingold 4.03.31-2
Free download link(Mega)
Required interfaces of BMW Rheingold 4.03.31:
BMW INPA K+DCAN USB cable or BMW ENET cable (need special setting)
For unpack archives use 7-zip 16.04 or higher.
All installed and ready to work.
Instructions for installation, configuration and solution of possible errors, is located in the Tools folder (FAQ-RU.pdf and FAQ-EN.pdf).
Read FAQs carefully in Tools folder before ask the questions !!!
ISTA-P – 112 GB
Service Data (SDP) – 70 GB
What’s included in torrent:
included in torrent

BMW ICOM ISTA-D 4.02 ISTA-P 3.60 with Engineering Software

Latest V2016.12 BMW ICOM Software ISTA-D 4.02.12 ISTA-P 3.60.0.600 With Engineer programming windows 7 hard drive is released in obdii365.com.

 

Works along with BMW ICOM, BMW ICOM A2, BMW ICOM A3, BMW ICOM Next

 

BMW ICOM Software Version:

ISTA-D 4.02.12
ISTA-P 3.60.0.600
VIN: 2016.9.12
Not connected 9000 days remaining

BMW ETK: 2016.12
BMW KSD 09.2016 Multilanguage
With free BMW Engineer Software (INPA, NCS, WinKFP, E-Sys 3.27.1, Psdzdata 59.0), BMW FSC code generator and BMW AiCoder

Multi-language available in diagnosing, programming and TIS diagram circuit: American English, British English, German, Spanish, French, Italian, polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Simplified Chinese, Traditional Chinese, Japanese, Korean and Thai.

BMW ICOM System Requirements:

Dual-core processor, better above I3; over 4G of memory

Supported Model:

We recommend you use this ICOM Software with Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.

 

2016.12V BMW ICOM ISTA-D 4.02 ISTA-P 3.60 Software Display:

v201612-bmw-icom-software-1v201612-bmw-icom-software-2v201612-bmw-icom-software-3v201612-bmw-icom-software-4v201612-bmw-icom-software-5v201612-bmw-icom-software-6v201612-bmw-icom-software-8v201612-bmw-icom-software-9

 

Theme: Fresh Print by BlogBaker. Powered by BlogBaker.