Posts tagged with "Renault CAN CLIP"

Renault CAN CLIP V171 Windows 7 Installation Guide

Update: CANCLIP 171 for Renault is tested successfully. How to install Renault CAN CLIP v171 diagnostic software.. Here you go.

 

Renault CAN CLIP V171 NEW FEATURES: Renault-CAN-CLIP-V171-download-new-features

Fitted in new vehicle: ALPINE A110 and DUSTER ph3.

 

Renault CAN CLIP V171 software download: (100% works)

http://www.obdii365.com/wholesale/cd-software-of-can-clip-v151-for-renault.html

 

Have tested no issues on:

Sp19-a: Quality A+++Renault CAN CLiP diagnostic interface

Sp19-c: High QualityRenault CAN CLiP diagnostic tool

Sp19-d: CheapestRenault CAN CLiP diagnostic tool

Sp19-E: Renault CAN CLIP with AN2135SC AN2136SC Full Chip

(Renault CAN CLIP china clones comparison:

http://blog.obdii365.com/2016/12/09/renault-can-clip-v162-cheapest-and-best-quality/ )

 

GENERAL INFORMATION:

 

Change of the display for data confirmation shown before the reprogramming of a calculator in order to emphasise the use of the criterion “Technische Spezifikation des Fahrzeugs”

 

Warning :

 

Maintenance of the Tecra A11 and CF19 MK2 ceased in January 2017 and they can no longer be registered.

 

Since January 2016 the DELL E5500 units have no longer been serviced and cannot therefore be registered any longer.

 

Since August 2015 the PANASONIC CF19 MK1 units have no longer been serviced and cannot therefore be registered any longer.

 

Maintenance of the PANASONIC CF18s ceased in May 2014 and they can no longer be registered.

 

 

Starting with DVD CLIP 161, reprogramming with a battery tension lower than 13V is no longer possible.

 

You absolutely have to connect a battery charger to the vehicle.

 

Three charger are currently available:

– Ateq BC512 (with or without printer)

– Acctiva Fronius Professional Flash 50A

– GYS Flash 50-12HF (rather favorable)

 

Please make sure you have this battery charger before starting any work.

 

How to install Renault CAN CLIP 171 on Windows 7 32 bit:

Usually, it takes one hour around to install Renault can clip software with the steps below:

Step 1 – install DAEMON Tools Lite

Step 2 – run Crack Renault CLIP

Step 3 – install CLIP 171

Step 4 – setup CLIP properties

Step 5 – register CLIP

Step 6 – setup in Computer management

Step 7 – diagnose cars via CLIP 171

 

How to install Renault CAN CLIP diagnostic interface on Windows 7 64bit:

 

*** why some Renault CLIP cannot work on Widows 7 64bit?

 The Clip software itself works with 64bit version of Windows 7 but the hardware wont.. Simply because the there are no 64bit drivers for SONDE can clip..

 

 I think there are no drivers made for 64bit windows
it
 works only with 32bit windows

 

*** What to do if Renault CAN CLIP cannot work on Windows 64 bit?

-Try disable driver signature enforsment in win 64bit..that help many times

 

 Or just RIGHT CLICK the .inf File and click INSTALL
Then if you get certificate error you can fix that in device manager/
by right click and install certificate even if invalid

 

 You need to know your can clip is probe (sonde) or alliance.
alliance = works both on 32 and 64 bit os
probe (sonde) = works only on 32 bit os
i think sonde is better than alliance

You can disassemble your CAN Clip and check it on PCB

real CAN CLIP PROBE clone  RLT2002

 

Renault CAN CLIP car list:

Renault-CAN-CLIP-V171-car-list

TWINGO

TWINGO PHASE 2

TWINGO II

TWINGO III

WIND

MODUS

CAPTUR/QM3/KABIN

CAPTUR/KAPTUR BR/IN/RU

CLIO

CLIO 2

CLIOIIP2/3/4

CLIO II PH 6

CLIO III

CLIO IV

THALIA/SYMBL

THALIA/SYMB 2

CLIO V6

CLIO V6 PH 2

MEGANE/SCEN

MEGANE II

SCENIC II

MEGANE III/SCENIC III

MEGANE IV

SCENIC IV

MEGANE IV SEDAN

KADJAR

KADJAR CN

KOLEOS/QM5

KOLEOS II/QM6

KOLEOS II CN/QM6 CN

LAGUNA

LAGUNA PHASE 2

LAGUNA II

LAGUNA PHASE 2

LAGUNA II

LAGUNA II PHASE 2

LAGUNA III

TALISMAN/SM6

SAFRANE

VEL SATIS

VEL SATIS PH2

AVANTIME

ESPACE

ESPACE IV

ESPACE PH2/3/4

ESPACE V

KANGOO

KANGOO MUX

KANGOOVLL

KANGOO II

KANGOO ZE/STOPSTART/PH2

TRAFIC

TRAFIC II

TRAFICP2/3

TRAFIC III

MASTER

MASTER PH2

MASTER PH3

MASTER RWD

MAST RWD PH2

MAST RWD PH3

MASTER III

SPIDER

SUPER 5

EXTRA

R19

R21/SAVANNA

R25

ALPONE

R5

R4

R9

R11

R12

R18

FUEGO

JEEP

LAGAN

SANDERO

LOGAN II/SANDERO II

DUSTER

DUSTER PH2

LODGY

DOKKER/KANGOO

NEW SM3/FLUENCE/MEGANE

LATITUE/SM5

SM7 – L7

TWIZY

ZOE

KWD

KWD BR

ALASKAN

 

MEGANE/SCEN

BA00…BA09

BA0A…BA0K, BA0L, BA0N, BA0R…BA0Y

BA10…BA19

BA1A, BA1C, BA1D, BA1F, BA1H, BA1AJ, BA1K, BA1M, BA1R, BA1U, BA1V, BA2A

DA02, DA03, DA04, DA05

DA0B, DA0C, DA0D, DA0F, DA0G, DA0H, DA0P, DA0W

DA10, DA11, DA13, DA14

DA1F, DA1H, DA1J, DA1S

EA01, EA02, EA03, EA04

EA0B, EA0C, EA0D, EA0F, EA0H, EA0P, EA0W

EA10, EA11, EA13

EA1H, EA1J, EA1S

FA05, FA0E, FA0J, FA0K, FA0N, FA0Y

JA00, JA01, JA04, JA05

JA0B, JA0C, JA0D, JA0E, JA0F, JA0G, JA0J, JA0K, JA0L, JA0N, JA0W, JA0Y

JA10…JA19

JA1A, JA1B, JA1D, JA1F, JA1H, JA1J, JA1K, JA1L, JA1M, JA1E, JA1S, JA1U, JA1V

JA2A, JA2B, JABF

KA01, KA04, KA05, KA06

KA0B, KA0D, KA0F, KA0J, KA0N, KA0V, KA0W

KA10, KA12, KA12

KA1A, KA1F, KA1H, KA1J, KA1M, KA1R, KA1U

LA00, LA01, LA02, LA04…LA09

LA0A, LA0B, LA0D, LA0E, LA0F, LA0G, LA0J, LA0K, LA0L, LA0N, LA0R, LA0S, LA0T, LA0U, LA0V, LA0W, LA0Y

LA10, LA11, LA12, LA16, LA19

LA1A, LA1C, LA1D, LA1F, LA1H, LA1J, LA1K, LA1L, LA1M, LA1R, LA1U, LA1V

LA2A

NA0B

SA01, SA05, SA09

SA0A, SA0E, SA0K, SA0N, SA0R, SA0U, SA0Y

SA1U

VA0J

MEGANE II

BM00, BM02, BM05, BM08

BM0B, BM0C, BM0F, BM0G, BM0H, BM0J, BM0L, BM0M, BM0T, BM0U, BM0W, BM0Y

BM11, BM13, BM14, BM16, BM17

BM1A… BM1G

BM1K, BM1M, BM1N, BM1R, BM1S, BM1T, BM1V, BM1W, BM1Y

BM20, BM2A, BM2B, BM2C, BM2K, BM2P, BM2V, BM2Y

CM00, CM02, CM05, CM08

CM0B, CM0C, CM0F, CM0G, CM0H, CM0J, CM0L, CM0M, CM0T, CM0U, CM0W, CM0Y

CM1I, CM13, CM14, CM16, CM17

CM1B, CM1C, CM1E, CM1F, CM1G, CM1K, CM1L, CM1M, CM1N, CM1R, CM1S, CM1T, CM1U, CM1V, CM1W, CM1Y

CM20, CM2C, CM2H, CM2J, CM2P, CM2R, CM2V, CM2Y

EM05, EM0C, EM0G, EM0J, EM0S, EM0U, EM0W

EM14, EM16, EM17

EM1B, EM1C, EM1D, EM1E, EM1G, EM1K, EM1M, EM1N, EM1R, EM1T, EM1U,

EM2C, EM2P, EM2T

GM02, GM0F

GM1E, GM01F

KM00, KM02, KM05, KM0B, KM0C, KM0G, KM0H, KM0J, KM0L, KM0S, KM0T, KM0U, KM0Y

KM13, KM14, KM16, KM17

KM1A, KM1B, KM1D, KM1E, KM1F, KM1G, KM1K, KM1M, KM1N, KM1R, KM1S, KM1U

KM23, KM24, KM26

KM2E, KM2F, KM2G, KM2K, KM2 KM2L, KM2M, KM2N, KM2V, KM2Y

LM00, LM02, LM05, LM08

LM0B, LM0C, LM0F, LM0G, LM0H, LM0J, LM0L, LM0P, LM0S, LM0T, LM0U, LM0Y

LM13, LM14, LM16, LM17

LM1A, LM1B, LM1D, LM1E, LM1F, LM1G, LM1K, LM1M, LM1N, LM1R, LM1S, LM1U

LM20, LM23, LM4

LM2A…LM2G

LM2L, LM2M, LM2N, LM2S, LM2T, LM2V, LM2Y

SM02, SM0F, SM16, SM1E, SM1F

MEGANE III / SCENIC III

BZ00, BZ03, BZ09

BZ0A, BZ0B, BZ0C, BZ0D, BZ0F, BZ0G, BZ0H, BZ0J, BZ0K, BZ0L, BZ0N, BZ0P, BZ0R, BZ0T, BZ0U, BZ0W, BZ0Y

BZ10, BZ11, BZ12, BZ13, BZ16

BZ1A, BZ1B, BZ1G, BZ1H, BZ1J, BZ1K, BZ1M, BZ1P, BZ1R, BZ1S, BZ1T, BZ1U, BZ1V, BZ1W, BZ1Y

BZ20, BZ23, BZ24, BZ25, BZ27, BZ28, BZ29

BZ2A, BZ2B, BZ2C

DZ00, DZ03, DZ04, DZ09

DZ0A, DZ0B, DZ0C, DZ0D, DZ0F, DZ0G, DZ0H, DZ0J, DZ0K, DZ0L, DZ0N, DZ0R, DZ0T, DZ0U, DZ0V, DZ0W, DZ0Y

DZ10…DZ18

DZ1A, DZ1E, DZ1G, DZ1H, DZ1J, DZ1K, DZ1M, DZ1N, DZ1P, DZ1S, DZ1T, DZ1U, DZ1V, DZ1W, DZ1Y

DZ20, DZ21, DZ23, DZ24, DZ25, DZ27, DZ28, DZ29

DZ2A, DZ2B, DZ2C

EZ00, EZ03, EZ09, EZ0L, EZ0N, EZ0P

EZ10, EZ14, EZ116, EZ1E, EZ1G, EZ1P, EZ1S, EZ1T, EZ1U, EZ1V, EZ1Y

EZ28, EZ29, EZ2A

JZ00, JZ02, JZ03, JZ09

JZ0A, JZ0B, JZ0D, JZ0F, JZ0G, JZ0J, JZ0L, JZ0N, JZ0P, JZ0R, JZ0U, JZ0Y

JZ10, JZ11, JZ12, JZ13, JZ14, JZ16

JZ1B, JZ1E, JZ1G, JZ1H, JZ1K, JZ1M, JZ1P, JZ1S, JZ1U, JZ1V, JZ1W, JZ1Y

JZ24, JZ25, JZ26, JZ28, JZ29

JZ2A, JZ2B, JZ2C

KZ00, KZ03, KZ09

KZ0A, KZ0B, KZ0C, KZ0D, KZ0F, KZ0G, KZ0H, KZ0J, KZ0K, KZ0L, KZ0N, KZ0P, KZ0R, KZ0U, KZ0W, KZ0Y

KZ10, KZ11, KZ12, KZ13, KZ14, KZ16

KZ1A, KZ1G, KZ1M, KZ1P, KZ1R, KZ1S, KZ1T, KZ1U, KZ1V, KZ1W, KZ1Y

KZ20, KZ23, KZ24, KZ25, KZ27, KZ28, KZ29

KZ2A, KZ2B, KZ2C

MEGANE IV

B9A1, B9A3, B9A4, B9A5, B9AE

B9M0, B9M6, B9MF, B9MR, B9MS, B9MV, B9NC

K9A1, K9A3, K9A4, K9A5, K9AE

K9M0, K9MF, K9MR, K9MS, K9MV, K9NC

MEGANE IV SEDAN

LVA1, LVA3, LVA4

LVM0, LVM3, LVMR

NEW SM3/FLUENCE/MEGANE

B30A, B303, B30A, B30B, B30C, B30D, B30F, B30G, B30J, B30K, B30L, B30M, B30P, B30R, B30S, B30T, B30V

B330, B332, B337, B33C, B33F, B33K, B33L

L300, L301, L302, L304, L305, L306, L307, L308, L309

L30A, L30B, L30C, L30D, L30F, L30G, L30H, L30J, L30K, L30L, L30M, L30P, L30R, L30S, L30T, L30V, L30W, L30Z

L330, L331, L332, L333, L336, L337, L339

L33B, L33C, L33F, L33G, L33H, L33J, L33K, L33L, L33M, L33N, L33P, L33R, L33S, L33T, L33U, L33V, L33W, L33Y

XX38

 

 www.obdii365.com

http://blog.obdii365.com/2017/09/27/install-renault-can-clip-171-on-windows-7/

How to set up Renault CAN CLIP V169 on Win7 Win10

What’s the Renault CAN CLiP V169 operation system requirement? Is it working on  Windows 10/8.1/7/ XP? This FYI of Renault CAN CLiP operation system… Enjoy!

 

Renault CAN CLiP Windows XP:…..100% YES, if using Renault CAN CLiP V169 from obdii365.com

renault-can-clip-v169-software-download-install-1

Renault Clip software is always definitely ok running on Windows XP system. But XP system is kind of out of date. Nowadays, most use Windows 7 system.

 

To run CLIP on WIN 7 or not, that’s a question of luck.

 

 

Renault CAN CLiP Windows 7 32 bit:…..100% YES, if using Renault CLiP from obdii365.com

 

The important note: there are 4 versions of Renault CAN CLiP china clone, incl.

Sp19-a: Quality A+++ Renault CAN CLiP diagnostic interface

Sp19-b: Most Populous Renault CAN CLiP diagnostic interface

Sp19-c: High Quality Renault CAN CLiP diagnostic tool

Sp19-d: Cheapest Renault CAN CLiP diagnostic tool

 

They differs in price, PCB design and driver software installation as well.

So please check your PCB version and choose the corresponding Renault CLIP Installation Video to update and follow.

 

For CAN CLIP Renault v169 with SP19-A,SP19-C:

 

For CAN CLIP v169 for Renault with SP19-B,SP19-D:

Basic steps to install CAN CLIP v169 for Renault:

Step 1 – install DAEMON Tools Lite

Step 2 – run Crack Renault CLIP

Step 3 – install CLIP application

Step 4 – setup CLIP properties

Step 5 – register CLIP

Step 6 – setup in Computer management

Step 7 – diagnose cars via Renault CLIP

 

 

Renault can clip windows 7 64 bit:

 

Here are users feedback on can clip windows 7 64 bit, some successful & some failed:

 

– Works fine on win7 x86.

 

– Yes, Can Clip runs on Windows 7-x64 and Windows 8….8.1-x64 m because use x-86 files from the system.

 

– If your version of Windows 7 Home Basic or Home Premium x64 it is normally not work, try Enterprise or Ultimate , I use Win 7 Ultimate x64 and canclip works very well

 

– Automatically detect a driver in both win7 and in win7-x86-x64, a kind can clip ALIANCE driver, bosch automotive … etc..
is absolutely necessary to have all updates made​to the operating system before installation canclip

 

– i try install in win 7 x64 pc but the driver of VCI not work

– It is NOT working in my Win7 64-bit

– same issue, not working W7 64bit

 

Tip 1: why some Renault CLIP cannot work on Widows 7 64bit?

– The Clip software itself works with 64bit version of Windows 7 but the hardware won’t.. Simply because the there are no 64bit drivers for SONDE can clip..

 

– I think there are no drivers made for 64bit windows…
it works only with 32bit windows

 

Tip 2:  What to do if Renault CAN CLIP cannot work on Windows 64 bit?

-Try disable driver signature enforsment in win 64bit..that help many times

 

– Or just RIGHT CLICK the .inf File and click INSTALL
Then if you get certificate error you can fix that in device manager/
by right click and install certificate even if invalid

 

– You need to know your can clip is probe (sonde) or alliance.
alliance = works both on 32 and 64 bit os
probe (sonde) = works only on 32 bit os
i think sonde is better than alliance

You can disassemble your CAN Clip and check it on PCB

real CAN CLIP PROBE clone – RLT2002

 

 

Renault CAN CLiP Windows 8:

 

If you Google “Renault CAN CLiP Windows 8”, there is little information of it. That is, few users run Renault CAN CLiP diagnostic interface on Windows 8.1. So, forget it better!

 

Also, someone said he’s using Windows 8.1 64bit.

 

Good luck!

 

 

Renault CAN CLiP Windows 10:

 

This is a customer solution of running Renault clip diagnostic software on WIN10:

 

For the Can Clip, I used the “Compatibility issues solver.” A program in Windows 10 (also present in Windows 7).

Click your right mouse button on the clip icon on the desktop > Properties > Compatibility tab > in compatibility mode for “Run this program in compatibility mode for” > Use arrow > make selection > for example, Windows XP (Service Pack 2) > Apply, OK > Save.

For me it works perfectly !!

 

(Big thanks to Johan from Netherlands)

 

 

THE MOST IMPORTANT: How to Update Renault CAN CLIP software WITHOUT ANY ISSUE

 

For Users with old CAN CLIP diagnostic tools wanna update CLIP software to the new version:

MUST read it!!!!!!!!!!!!!!!!!

 

Users have to go to update before using the new software

Select Update, then DO NOT operate the computer

Wait for ONE MINUTE

CLIP update is available once

 

Credits to http://blog.obdii365.com/2017/07/09/download-install-renault-can-clip-v169/

Free Download Renault CAN CLIP V169 for Windows 7

Notice:

06.2017 Renault CAN Clip V169 software is now available!

Here obdii365.com offer you Can Clip 169 free download link and WIN7 installation guide.

Need good quality Renault Can Clip Interface!

renault-can-clip-v169-software-download-install-1-2cy1urw

Download Renault Can Clip V169 software + decryption key:

https://mega.nz/#!ZApxzTZZ!suQz2Fxt3vd33ggjsLLS-e52CDnT9snaDrrmH-k2APk

NO PASS

Enjoy at your own risk and hope it helps!

For 100% tested OK version: Renault Can Clip V168 Crack CD!

 

Which Renault Can Clip diagnostic tool recommended?

Renault Can Clip FULL Chip with AN2135SC AN2136SC

(Best quality)

renault-can-clip-full-chip-pcd-board-AN2135SC-AN2136SC-2-1brcfpe

Renault Clip clone

(Most cost effective)

renault-can-clip-a-PCB-3-2ftkyrk

(4 Steps) How to install Renault Can Clip V169 software on Windows 7?

Remember to disconnect Internet connection before installation.

Download and extract Can Clip V169 zip file.

Go to the folder “Activation (Patch V3)”, open “Crack Renault CLIP” registration entries.

Run Can Clip V169 setup.exe.

Now Can Clip V169 installation start!

 

Step 1

renault-can-clip-v169-download-software-installation-guide-4-1gjm1v2

Click the “First Installation” icon.

Choose “I accept…” and “Next”.

renault-can-clip-v169-download-software-installation-guide-5-1dlh8pu

OTHER COUNTRIES and “Next”.

Choose the language: ENGLISH and “Next”.

Choose the manufacturer: RENAULT, “Next” and “Next”.

Wait about 5 minutes, then follow the tips to restart your computer to complete the “First Installation”.

 

Step 2

Right click the “CLIP” icon on desktop and choose “Properties”.

Click “Open File Location” and cut the RSRWin application to desktop.

renault-can-clip-v169-download-software-installation-guide-4-1gjm1v2

Back to the folder “Activation (Patch V3)”, copy the RSRWin application to the former Local Disk C: location.

 

Step 3

Open this RSRWin, you are now start CLIP Registration.

Check the box “I understand and accept…” then click “Register me now” button.

You can see a pop-up question “Are you a part of Renault network?”, click “NO”.

Now you need to enter CLIP Registration unlocking codes.

Back to the folder “Activation (Patch V3)” and fulfill the blanks according to the pictures step 1-step 5.

Then click “Confirm” and “OK”.

 

Step 4

Cut the RSRWin application on desktop back to Local Disk C:/CLIP_X91/Lib/Application, choose “Move and replace”.

After that you can see it’s installing the software driver.

Now you successfully install Renault Can Clip V169 software!

http://www.autoobdtool.fr

Renault CAN CLIP V163 and Patch Free on Mega

Renault and Dacia Diagnostic Interface Renault CAN CLIP released new software version V163.  Enjoy free V163 software and registration patch here.

Renault CAN Clip v163 software

https://mega.nz/#!qAkjWaQQ!TXwI6_Ah5iXNCfzWKNBSGbN6dZVcZOqB2Wb2FCDpqQk

registration patch V3.0:

https://mega.nz/#!twgF3KpQ!dzliUpQFxv3FyI2A5zGGv344–yw3t-WJWInU2f7R5A

Compatible interface:

 

There has so many different Renault CAN CLIP for to choose, this blog will recommend The best Quality and most stable one—Renault CAN CLIP diagnostic interface with chip CYPRESS AN2135SC or AN2136SC.

 

It has no communication problems when using this CAN CLIP for Renault

renault-can-clip-with-chip-an2135sc-an2136sc-01

Renault Can Clip with AN2135SC or AN2136SC chip PCB pictures:

renault-can-clip-with-chip-an2135sc-an2136sc-04

renault-can-clip-with-chip-an2135sc-an2136sc-05

renault-can-clip-with-chip-an2135sc-an2136sc-06

 

We can see the chip CYPRESS AN2135SC or AN2136SC was added to the PCB. This chip works more stable and has a longer using Life than other versions of CAN CLIP.

 

 

Also, This version performs the same functions with others (SP19-BSP19-CSP19-D), it worksWell on systems ENGINE, automatic gear change, air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-II, and so on.

This version Works ok on both Windows XP and Windows 7

You can also use Renault CAN CLIP to do:

-View all information relating to the vehicle,

-computer test

-Automatic test of all computers

-Airbag test

-Ccantool (OBD tests)

-Base Doc (access to Technical Notes)

-physical measurements

-Anti pollution

-multimeter

 

Other version of CAN CLIP:

Renault Can Clip V162 PCB Pic

renault-can-clip-7

renault-can-clip-8

There is no need for more explanation about this version of CAN CLIP, it is the most Well known among users, it has noissues within scan and diagnose duty.

 

Renault Can Clip With AN2131QC chip

renault-can-clip-an2131qc-9

renault-can-clip-an2131qc-10

renault-can-clip-an2131qc-11

These are PCBs of Renault V162 CAN Clip with AN2131QC chip.

 

Renault Can Clip V163 With the Cheapest Price

renault-can-clip-v162-cheapest-12

This is PCB of the recently released Renault Can Clip Clone(Dec. 2016), it is the cheapest one among Renault diagnostic tools. Renault can clip V163 can work with this interface.

http://obd365.blogrip.com/2016/12/21/free-download-renault-can-clip-v163-and-patch/

Which is the working Renault key card programming tool?

Share my interesting experience… Have tried many tools for Renault key programming, like CarProg, SBB, Renault CAN CLIP, etc. But only successfully program Renault keys with FLY FVDI2 arbites commander.

 

my experience failed on 2008 megane:
Carprog clone 4.74 lib file not worked
SBB v33 clone not worked (they don’t its on internet)
Renault CAN CLiP 110/134 keeps faulting on final stage with error “execution condtions unsatisfactory”

SKP900 i am told by seller will do it, but i read that it will not do it
MVP M8 will do it apparently but i have no experience to offer

Personally, I have to say i think the Flyobd FVDI2 is the way to go but I am unhappy with there change in policy to charge for updates, plus they seem to be getting to expensive for the new modules

 

Now, i have managed to program keys for some models:

 

Scenic 2 2004
Key Learning (keycard pcf 7947)
with FVDI2 renualt 5.2
–> Ok

 

Scenic II ph2 1.5 dci 2009
learning key
with FVDI2 renualt 5.2
–> Ok

 

Clio 2 2010
Key learning
with FVDI2 renualt 5.2
–> Ok

 

Kangoo DCi 1.5 ecu Delphi TRW DDCR 1.5 DCi 2005
Transponder learning 7936
with FVDI2 renualt 5.2
–> Ok

 

clio classic petrol 2004
reading pin
with FVDI2  5.2
–> Ok

 

Traffic 2004
pin read and key programming from UCH dump
with Tagkey Tool 6.2
–> Ok

 

Grand Scenic 2005
pin read and key programming
with FVDI renualt 6.3
–> Ok

 

Espace 2006
pin read and key programming
with FVDI2 renault v6.3
–> Ok

 

So far, that’s all models i tried successfully. Wish this help someone else.

http://blog.obdii365.com/2016/12/04/renault-key-card-programming-success-with-fvdi2/

How to Install V162 Renault CAN CLIP Software

Renault CAN CLIP interface V162 diagnostic software has been verified working without any issues by obdii365 engineers. Here is the instruction on how to install CAN CLIP V162 on Windows xp system.
Update:
via CD (Renault CAN CLIP v162 software CD)
Operating system:
Windows XP
Model coverage:
Renault 1998-2016
CAN CLIP v162 function:
Professional diagnosis on ENGINE, automatic gear shifting, Air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-I I and so on.
New models in CLIP 162:
XBB
CLIP 162 installation:

Step-by-step installation:

Step 1 – run Crack Renault CAN CLIP
Insert CAN CLIP 162 disk E: and open it.
Copy Activation(Patch V3) to Desktop
Open Crack Renault CLIP registration entries
Register Editor: click Yes.
Click OK.
Step 2 – install Renault CLIP 162
Run setup.exe
CLIP V162 is running automatically
Click the laptop icon (FIRST INSTALLATION) in CLIP V162 interface.
FIRST INSTALLATION
Click “I accept…agreement” and click Next.
Select country. (here, select OTHER COUNTRY). and click Next.
Select language and click Next.
select-language
Manufacturer:Renault. click Next.
Click Next to begin copying files.
Click Next to install Windows resources kit tools
Accept the agreement
Then next
Install now
Successfully installed Windows resources kit tools
installed Windows resources kit tools
Installing clip….
Renault can clip installation success
 installation success
RESTART your computer
Step 3 – setup CLIP properties
Open CLIP properties on Desktop
Open file location:
Cut RSRWin application in local disk C:/ CLIP_X91/ Lib/ Application
Paste RSRWin application on Desktop
Close CLIP properties
Replace RSRWin with another RSRWin application in Computer/renault can clip disk E:/Activation(Patch V3)
Step 4 – register CLIP
Run RSRWin application in local disk C:/ CLIP_X91/ Lib/ Application
Accept the license and register CLIP
register CLIP
Are you part of the Renault Network? Select No.
Enter the unlocking code with the picture guide Renault Clip Registration Step 4 in the folder Activation(Patch V3)
Activation
then click Confirm.
Registration successful: click OK.
Registration successful
Replace “RSRWin” in C:\CLIP_X91\Lib\Application with”RSRWin” on Desktop
Prompt: installing device driver software…
Prompt: device driver software installed successfully
Step 5 – setup in Computer management
Automatically install driver software
Open computer management
select Device manager->Bosch automotive service solution device->18-alliance vehicle communication interface
select Device manager
close Computer management
Open Display properties
Go to screen saver->power and setup:
power scheme: Always on
Turn off monitor: never, never
Turn off hard disk: never, never
System standby: never, never
Click on Apply, then OK to exit
Click on Apply
Step 6 – open CLIP v162 to begin diagnosis
Run CLIP renault software
There will be a computer security alert. Just click Unlock.
renault-can-clip-v162-1
renault-can-clip-v162-2
renault-can-clip-v162-3
renault-can-clip-v162-4
renault-can-clip-v162-5
Then exit CLIP and run it again
renault-can-clip-v162-6

 

renault-can-clip-v162-7
renault-can-clip-v162-8
renault-can-clip-v162-9
renault-can-clip-v162-10
Done!
Disclaimer:
there are mainly two kinds of China Renault CLIP, but the new Renault CAN CLIP 162 only work with one with the following pcb.
renault-can-clip-pcb-1
renault-can-clip-pcb-2

V159 Renault CAN CLIP what operating system works?

Which operating system can best work on Renault CAN CLiP v159 (or other old versions)? Here, obd365 collects what CLIP users said, especially for the issues of unsuccessful installation on Windows 7 64bit and optional solutions of it.

 

*** Works on Windows XP

Works only Win XP, if you want you need a virtual machine for use this in win 7 but i never tested this

 

*** Windows 7, work or not

– Works fine on win7 x86.

 

– Yes, Can Clip runs on Windows 7-x64 and Windows 8….8.1-x64 m because use x-86 files from the system.

 

– If your version of Windows 7 Home Basic or Home Premium x64 it is normally not work, try Enterprise or Ultimate , I use Win 7 Ultimate x64 and canclip works very well

 

– Automatically detect a driver in both win7 and in win7-x86-x64, a kind can clip ALIANCE driver, bosch automotive … etc..
is absolutely necessary to have all updates made​to the operating system before installation canclip

 

– i try install in win 7 x64 pc but the driver of VCI not work

– It is NOT working in my Win7 64-bit

– same issue, not working W7 64bit

 

*** why some Renault CLIP cannot work on Widows 7 64bit?

– The Clip software itself works with 64bit version of Windows 7 but the hardware won’t.. Simply because the there are no 64bit drivers for SONDE can clip..

 

– I think there are no drivers made for 64bit windows…
it works only with 32bit windows

 

*** What to do if Renault CAN CLIP cannot work on Windows 64 bit?

-Try disable driver signature enforsment in win 64bit..that help many times

 

– Or just RIGHT CLICK the .inf File and click INSTALL
Then if you get certificate error you can fix that in device manager/
by right click and install certificate even if invalid

 

– You need to know your can clip is probe (sonde) or alliance.
alliance = works both on 32 and 64 bit os
probe (sonde) = works only on 32 bit os
i think sonde is better than alliance

You can disassemble your CAN Clip and check it on PCB

real CAN CLIP PROBE clone – RLT2002

can_clip_1

Allianbce hybrid Can Clip sonde – 926573

can_clip_2

Renault CAN CLiP V155 software tested working

Renault CAN CLIP V155 diagnostic software for Renault/Dacia has been tested ok, and will be released soon. Here’s the new information about the latest CLIP 155.

 

Renault CLIP 155 update information

– new model

Fitted in a new vehicle: XZG

– new operation

Reading of the diagnostics cards via the RNFI token

* when CLIP is closed. The connection window appears for the token and the pass must be entered so that the diagnostics cards can be read.

– general information

Maintenance of the PANASONIC CF18s ceased in May 2014 and they can no longer be registered.

– infoweb – world-wide- launch

From now on, Renault users (with token) of the CLIP diagnostic product will have access to the CLIP InfoWeb service: a new information website for CLIP owners. This site contains information on Renault CLIP products, service, contact details and assistance data to help with everyday queries.

Renault-can-clip-155-new-info

 

Language:

English, German, French, Danish, Spanish, Portuguese, Finnish, Italian, Norwegian, Dutch, Romanian, Swedish and Russian (newly-added)

 

Hardware and software requirements for Renault CAN CLip V155:

Software requires at least AMD or Intel Celeron/Pentium CPU 1.5 GHz, 1 GB RAM, 10 GB free HDD space, USB 1.1 port (USB 2.0 recommended) and Microsoft Windows XP with the latest service pack installed.

The latest version of Renault CAN Clip run perfectly in:

* Microsoft Windows 7 32Bit, Professional and Ultimate editions, latest service pack installed.

 

Main menu in CAN CLIP 155:

Clip’s main menu allows you to do

– computer test

– automatic test of all computers

– reprogramming

– airbag test

– scantool (OBD tests)

– Base Doc (access to Technical Notes)

– physical measurements

– antipollution

– multimeter

It’s very simple to diagnose a vehicle using Renault CAN CLip Diagnostic Interface: just select the vehicle make, enter the V.I.N. and press ENTER.

 

Software display:

* display Renault CLIP v155 in Russian

Renault-can-clip-155-new-info-2

clip-155-Russian-(2)

clip-155-Russian-(3)

clip-155-Russian-(4)

* display CAN CLIP v155 software in English

 

renault-can-clip-155-English-(1)

 

can-clip-155-English-(3)

can-clip-155-English-(4)

http://blog.obdii365.com/2016/02/25/renault-can-clip-v155-coming-soon/

How to install Renault CAN CLiP V154 software

Renault CAN CLiP diagnostic interface for Renault& Dacia software has newly released to V154 (Dec. 25th, 2015) . OBD365 offers CLIP V154 free download and installation tips.

 

Software version: V154

New added features: adds Renault XZH model

Renault-CAN-Clip-V154

CAN CLIP V154 torrent free download:

https://mega.nz/#!Ed1HXaqI!ZdZ4TE2DZ0x8lVJtHH3lJtgNfuex7ODbzQ1Hl3KI6OQ

Compatible device:

Renault CAN CLIP

(Two types of CAN CLIP at obd365: SP19-BSP19-C)

can clip v154

How to install CLIP V154:

Step 1: Install Daemon tools 

Step 2:Install CLIP-154.nrg

Step 3 Install Renault Clip V154 setup.exe

Step 4 Activate/Register Renault CAN CLIP software

Step 5 Install CAN CLIP driver

Step 6 Run software 

 

How to install Renault CAN CLiP V154 (SP19-B) 

How to install Renault CAN CLiP V154 (SP19-C) 

V154 Renault CLIP display:

CAN-CLIP-V154-(1)CAN-CLIP-V154-(2)CAN-CLIP-V154-(3)CAN-CLIP-V154-(4)CAN-CLIP-V154-(5)CAN-CLIP-V154-(6)

Free download V153 Renault CAN Clip and installation

Renault CAN Clip diagnostic interface for Renault/Dacia software V153 is released and verified working fine.

Software version: V153

Renault Clip V153 new features:
Fitted in new vehicle: MEGANE IV.

renault-can-clip-v153-new-feature

New Operations:
Reading of the diagnostics cards via the RNFI token
.When CLIP is closed, the connection window appears for the token and the password must be entered so that the diagnostics cards can be read.

 

General information:
Maintenance of the Panasonic CF18s ceased in May 2014 and they can no longer be registered.

Can clip V153 compatible hardware:
Can clip V153 is compatible with all available can clip hardware at obd365, including: SP19-B andSP19-C

Renault Can clip V153 torrent download:
http://www.chinaautodiag.com/download/can-clip-v153-torrent.rar

 

O/S requirement:
The computer’s operating system must be Windows XP US English

Here are several pictures which prove Can clip v153 successfully work on Renault TWNGO PHASE 2.

Input Renault TWNGO PHASE 2 basic information

renault-can-clip-v153-1

Enter computer test, select PETROL INJECTION

renault-can-clip-v153-2

Select FAULTS TEST.

renault-can-clip-v153-3

FAULT TEST

renault-can-clip-v153-4

Enter COMPUTER IDENTIFICATION

renault-can-clip-v153-5

How to install Renault CAN Clip v153 software

Step 1: Install Daemon tools

Open Clip-153 software CD

Install DAEMON Tools

renault-can-clip-v153-install-1

Click Next

Click Next

Click Next

Click Yes

 

 Step 2:Install CLIP-153.nrg

Click CD icon on the button of the Toolsbar

Choose Virtual CD/ROM DVD->Device 0-> Mount Image

renault-can-clip-v153-install-2

Select mount image from My computer Clip 153 CD->Application (Patch v3)

Select to view all files

renault-can-clip-v153-install-3

Install CLIP-153.nrg

Click Cancel to cancel install Wizard shell

Open Clip-v153 CD

Copy Application (Patch v3) files to desktop

Open patch folder on desktop

Merge Crack:Renault CLIP

renault-can-clip-v153-install-4

Click Yes

Click OK

 

Step 3 Install Renault Clip V153 setup.exe

Open My computer

Install 153-0-0-0(G) software

Install setup.exe

Click First installation

renault-can-clip-v153-install-5

Accept license agreement

Click Next

Select country: Other countries

Click Next

Select software language

renault-can-clip-v153-install-6

Click Next

Start Copying files, click Next

Install Resource Kit Tools setup wizard

Click Next

Accept license agreement

Click Next

Click Next

Click Install Now

Click Finish when setup is well installed

The system will automatically bring you to the Renault CLIP V153 First installation interface, click Next

Click Finish to complete first installation

 

Step 4 Activate/Register Renault CAN CLIP software

If the system asks to Install hardware wizard, click Cancel first

Right click CLiP software->Properties->Find Target

Open Patch v3 folder on desktop

Cut RSRWin file from Application folder and paste it to desktop

Copy RSRWin from patch folder and paste it to Application folder

renault-can-clip-v153-install-7

Open RSRWin in Application folder

Accept license agreement

Click “Register me now”

renault-can-clip-v153-install-8

Click No

Enter the registration code and confirm

renault-can-clip-v153-install-9

Click OK

Cut RSRWin in desktop and replace the one in Application folder

renault-can-clip-v153-install-10

Click OK

 

Step 5 Install CAN CLIP driver

Install driver

Connect Renault CAN Clip interface with computer via USB cable

Click Next

Click Finish to install driver

Open My Computer>>Device Manager>> Auto motive Service solution Device

>>Aliance Vehicle Communication Interface

To check interface is connected well

renault-can-clip-v153-install-11Step 6 Run software 

Open CLiP software on desktop

See new update new information

Complete vehicle information

Click COMPUTER TEST

renault-can-clip-v153-install-12

Select Petrol injection

Select Faults Test

Start diagnosing and programming

Theme: Fresh Print by BlogBaker. Powered by BlogBaker.