Posts tagged with "toyota techstream"

Techstream customization options on Toyota 4Runner

Here’s some screenshots I just took for any beginners wanna have a customization on his/her Toyota.
It works 100% the same as the dealers.It’s very self explanatory and specific testing/trouble shooting a specific system/component is in a step by step process in the factory repair manual.
Turn on ignition, plug the Vxdiag scan tool in the OBDII port and click “connect vehicle”, fill in the options and hit next!
toyota-techstream-customize-4runner-1
Comes up with this page and you can see the options and systems you can click on and the stored data button to see and clear DTC’s.
toyota-techstream-customize-4runner-2
This is clicking on the “Customize Settings” button.
toyota-techstream-customize-4runner-3
This is clicking on the ” Wireless Door Lock”
toyota-techstream-customize-4runner-4
And the seat one most people want changed…
toyota-techstream-customize-4runner-5
And this is clicking on the “Tire Pressure Monitor” system from the main page.You can see the pressures and TPMS ID’s. My left front is a little low!There are other test you can run from within the TPMS system
toyota-techstream-customize-4runner-6
Vxdiag vcx nano for Toyota techstream customization settings success!

How to set up Techstream on VAS 5054 pass thru

Here is a customer solution to make Toyota Techstream 10.30.029 & Honda HDS 3.016.033 work with vas 5054a interface. Good luck!

 

First, free download different Techstream and HDS installation Kitshttps://mega.nz/#F!5wQ0UDJJ!BFnI-KgJurqgceVUe5wweQ

Inside you will find different versions for XP and Windows 7 for Techstream and Honda HDS
Part 1: How to get VAS 5054A to work with Toyota Techstream 10.30.029

VAS5054A with Toyota Techstream as Passthru

Install Techstream
Install PassThru drivers for VAS 5054
Activate
Connect head to PC and 12V.
Open Techstream and configure interface.

 

Part 2: How to get VAS5054A to work with Honda HDS 3.016.033

Test HDS (Honda Diagnostic System) maybe will work also 🙂

1. Install your VAS5054A passthru driver.

2. Download download and install now the Honda HDS

3. Finish your installation…

4. Connect VAS5054A to PC and 12V(car or on bench)

5. Load your HDS > click on the famous F12 button and choose your VAS5054A Head.

6. Connect your VAS 5054A to the car then to your laptop & start your work…

 

ps. VAS 5054a do see VCI when loading techstream/HDS?

I installed passthru driver windows 7 x32.
But the driver , it seems to me , do not see the VCI.
This VAS 5054A clone Bluetooth interface works with ODIS S and ODIS-E properly

vas-5054a-not-see-vci-1

vas-5054a-not-see-vci-2

vas-5054a-not-see-vci-3

vas-5054a-not-see-vci-4

Problem solved.
1. Install D-PDU_API V1.20.23 FW 2.20.23
2. Re-install SAEJ2534-1 for VAS 5054A Version 1.0.0.14
3. Re-configure VAS5054A with serial number

And all works, now only test OK.

The problem was the serial number bad configured , all 5054a clones have 082145725. It is risky to configure the adapter.

vas-5054a-see-vci-1 vas-5054a-see-vci-2

BTW, Techstreeam work on ford vcm2 and gm mdi multiple interface like a charm, not need to do any change on the J2534 interface!!!

Enjoy!
Credit to Fantomel

http://blog.obdii365.com/2017/04/19/install-techstream-honda-hds-on-vas-5054a-pass-thru/

How to Install Toyota Techstream 12.00.127 for MINI VCI

The newest Toyota Techstream software v12.00.127 is verified to work 100% with the MINI VCIcable, Xhorse MVCI ,VXDIAG VCX NANO for Toyota, Toyota OTC 2 diagnostic tool. So, Techstream 12.00.127 Windows 7 / Windows XP, how to install? Here are the Tis Techstream 12.00.127 installation demos and step-by-step installation guides of.
How to install Toyota Techstream 12.00.127 on Windows 7
Operation system:  Windows 7 (Windows XP also no issues)
Install Toyota Techstream V12.00.127 for MINI VCI/Xhorse MVCI:
Go to disk E: toyota mangoose
Open GTS_12.00.127_TME_NDSI application
Choose the Techstream setup language
select-language
Begin to install Techstream software
install-setup
Accept the agreement
Enter the name and company
Techstream software is configuring your new software installation…
Installing….
Click on Finish
Successfully installed Techstream 12.00.127 software!
install-mvci-driver
Copy MainMenu application
Go to Techstream properties
Open File Location:…Program files/Toyota diagnostics/Techstream/bin
Copy and replace MainMen
Run MVCI Driver for TOYOTA to install (it’s in disk E:)
Begin to install MVCI driver
driver-install-completed
Installing MVCI driver for toyota tis…
Finish MVCI driver installation

Pop-up: instilling device driver software
Pop-up: your device is ready to use
Run MVCI Firmware Update Tool on Desktop
run-mvci-firmware-update
Run Techstream on Desktop
Pop-up: Java can be obtained from the web? NO!
Go to Setup->Techstream Configuration
techstream-configuration
Select Area: Europe, Language: English,
select-region-language
Add caption
enter-registration-code
Connect to Vehicle
Enter the new key with the help of “key” text in software disk:
enter-register-key-on-key-pad
Initializing USB communication
Connecting to vehicle…
Techstream 12.00.127 diagnose VIOS ok
toyota-techstream-12-00-127-1
toyota-techstream-12-00-127-2
toyota-techstream-12-00-127-3
toyota-techstream-12-00-127-4
toyota-techstream-12-00-127-5
NOTE:
This how-to’s is for users with MINI VCI, MVCI 3 in 1
For users with Toyota OTC2 diagnostic tool , please refer the video below:
How to install Techstream v12.00.127 for Toyota OTC2
Only differs from the driver installation!
Have fun!

Free Download Toyota V12.00.124 Techstream

Techstream 11 is and old story. Now, free download the newest TOYOTA TIS Techstream V12.00.124 software:

https://mega.nz/#!KJBRlQaC!WNKXptGws2SUeYnBw0N0zbkeA03EenPKFLr3_-l-e1k

(no pass but not activate, not tested by professionals)

toyota-techstream-v12-00-124

For techstream login, go to http://cartechnology.co.uk/showthread.php?tid=22046to ask for techstream key. It’s kind of Autokent who always offer free toyota techstream and help activate for all. BIG THANKS to Autokent.

 

But if you want toyota techstream crack that is activated and without passwords. Old versions are recommend:

Mini VCI Toyota TIS Techstream V10.30.029(customizing)

TVXDIAG VCX NANO for Toyota Techstream V10.30.029(key programming)

 

techstream scan tool:

MINI VCI cable (xhorse mvci also ok to use with)

VXDIAG VCX NANO for Toyota

 

The most populous techstream software and cable is Mini vci cable,working perfect in basic obdii diagnosis and customizing settings.

 

But for toyota techstream key programming, you need Vxdiag vcx nano for Toyota. This programming function has been tested without issues by engineers working at obdii365.com.

 

So, toyota techstream price differs from what can be realized through techstream software. Techstream cable is usually for $16-$22

 

Reference: toyota techstream manual at http://blog.obdii365.com

V11.20.019 Toyota TIS Techstream for ECU Programming

Here is the free download resource of Toyota Techstream V11.20.019, which enhances and adds a lot in functions like health check (diagnosis), customize setting, ecu programming and CAN BUS for many models.

toyota-techstream-tis-v11-20-019-1

Free download Techstream:

Techstream 11.20.019 – newest but unknown security

https://mega.nz/#!rRR3kIBJ!l-y7uP4i5oh6MksxAxFIKquorGLretTMyshEoIrNB7Y

Techstream 11.20.019 – newest and tested without issues

http://www.obdii365.com/wholesale/toyota-otc2-scanner-programmer.html

Techstream TIS 10.30.029 – without issues, safe

http://www.obdii365.com/wholesale/vxdiag-vcx-nano-for-toyota-tis-techstream-compatible-with-sae-j2534.html

 

Toyota Teachstream V11.20.019 Update Info  
Category Vehicle System Function Content
Vehicle Coverage Covered all the models by October 2016.
New Functions PRIUS PHV DC Quick Charging Control Added new system “DC Quick Charging Control”.
RAV4, etc. Telematics ID Information Display Added new Utility “ID Information Display”.Description:This function displays the identification information of Telematics ECU.
PRIUS PHV Air Conditioner Middle Differential Pressure Valve State Check Added new Utility “Middle Differential Pressure Valve State Check”.Description:This function is used to confirm the state of Middle Differential Pressure Valve.
PRIUS PHV Air Conditioner Refrigerant Filling Mode Added new Utility “Refrigerant Filling Mode”.Description:This function is used to enter the Refrigerant Filling Mode.
PRIUS PHV Hybrid Control EV Mode Cruising Range Reset Added new Utility “EV Mode Cruising Range Reset”.Description:This function is used to reset the cruising range for EV mode.
PRIUS PHV HV Battery Hybrid Battery Thermal Keep Control Mode Setting Added new Utility “Hybrid Battery Thermal Keep Control Mode Setting”.Description:This function sets Hybrid Battery Thermal Keep Control Mode when a vehicle is sold in an extremely cold region.
Functional Improvement PRIUS, etc Hybrid ControlHV BatteryMotor Generator Freeze Frame Data Added FFD Filter function.
Engine Activetest Changed display text of Information of “TC Terminal” to “This test activates the TC and TE1 terminal ON/OFF.”.
LS, LX, GS, ES, RX, IS, LC, PRIUS, etc Rain Sensor CAN Bus Check Modified the System Name of CAN Bus Check from “Rain Sensor” to “Rain and/or Humidity Sensor”.
LS, LX, GS, ES, RX, IS, LC, PRIUS, etc Rain Sensor System Selection Menu Modified the System Name of System Selection Menu from “Rain Sensor” to “Rain and/or Humidity Sensor”.
AURIS NRECROWN ARSGS350 GRL(2GR-FKS)IS200t ASENX200t AGZPRIUS ZVW5RC200t ASCRX200t AGLGS350 GRL(2GR-FSE) is inapplicable. Engine Fuel Consumption Deleted “Injection Volume” displayed items on Fuel Consumption.
CROWN ARSGS350 GRL(2GR-FKS)IS200t ASENX200t AGZRC200t ASCRX200t AGLGS350 GRL(2GR-FSE) is inapplicable. Engine Activetest Add display text of Information.D-4S (A/F Control)D-4S (Fuel Cut)D-4S (Injection Volume)AddWhen High Fuel Pressure Value is too high, it may prevent switching to Direct injection.Continuous long Port injection raises the fuel temperature due to the heat of the engine, resulting in the increase of High Fuel Pressure Value.Switch to Direct injection by driving the vehicle to lower the High Fuel Pressure Value.Please increase The Engine load as running an Air Conditioner and loading electric if Direct injection is not changed from Port injection.
Bug Fix RX Back Door DataListCustomize Fixed the bug;Data monitor / customize revised the problem which was not displayed by emblem sensor non-installation vehicle.
           

 

Note:

ECU programming function via Techstream only can be performed on VXDIAG VCX NANO for Toyota;

Xhorse Mini VCI cable can only do some easy diagnosis and customize setting, but not ecu programming.

toyota-techstream-tis-v11-20-019-2toyota-techstream-tis-v11-20-019-3toyota-techstream-tis-v11-20-019-4toyota-techstream-tis-v11-20-019-5

toyota-vxdiag-vcx-nano-mini-vci

 

 

Software requires activation. If you need the activation/registration/license code, please contact Mr.autokent in autoprofessionals.org forum.

https://eobd21.wordpress.com/2016/09/08/v11-20-019-toyota-tis-techstream-for-ecu-programming/

Techstream reset Lexus LX570 smart code

Test update from obdii365.com! Managed to reset immo smart code on 2016 Lexus LX570 using Toyota Techstream TIS v11.20.019, v11.00.019 and v10.30.029, all versions success. Here reports the results with photos of Techstream v11.00.019 as example.

 

Model:

Lexus LX570 2016 3eu-fe engine

 

Software version available to test:

Techstream TIS v10.30.029

Techstream v11.00.019

Toyota Techstream v11.20.019

 

Scanners tested with:

VXDIAG VCX NANO for Toyota

TOYOTA OTC 2

(both scanners work ok, but mini vci cable will not!)

 

NOTE: Immo reset function is only available in the North American region of the program. Not sure if lower version techstream will work. Try at your risk.

 

Prepare a working Techstream v11.00.019 software

Connect Techstream cable to LX570 and the laptop

Run Techstream v11.00.019 interface

Techstream-v11.00.019-immo-reset-(1)

Connect to vehicle

Techstream-v11.00.019-immo-reset-(2)

Finish vehicle information and click Next to go on

Techstream-v11.00.019-immo-reset-(3)

Select Smart Access

Techstream-v11.00.019-immo-reset-(4)

Click Utility on the left column

Then Smart code reset

Techstream-v11.00.019-immo-reset-(5)

Tick on I understand and confirm the drivers door open, then Next

Techstream-v11.00.019-immo-reset-(6)

Input VIN, then Next

Techstream-v11.00.019-immo-reset-(7)

Input Pass-Code number, then Next

Techstream-v11.00.019-immo-reset-(8)

Smart code reset failed, and try again

Techstream-v11.00.019-immo-reset-(9)

Back to the interface of “Welcome to the Smart Code Reset utility”

Again, tick on I understand and confirm the drivers door open to continue

Again, input VIN, then Next

Go to Techstream ImmoReset PassCode Calculator

Select versions and input VIN

Then click Get Pass-Code

Techstream-v11.00.019-immo-reset-(10)

Copy the Seed number to Techstream ImmoReset PassCode Calculator

Techstream-v11.00.019-immo-reset-(11)

Then click Generate to get Pass Code

Techstream-v11.00.019-immo-reset-(12)

Copy the Pass Code to Pass-Code Number, then Next

Techstream-v11.00.019-immo-reset-(13)

It will take 16 minutes for the reset to complete

Techstream-v11.00.019-immo-reset-(14)

Smart code reset by Toyota Techstream v11 SUCCESS.

Cheap solution to Scion 2009 XB Power Steering Problem

Here is the customer solution to Scion xB 2009 model power steering issue.

 

Problem:

I am driving a Scion XB 2009 yr. So yesterday I went to leave work, and no power steering. Steering wheel light was on. Managed to drive it an hour and a half home and did some quick research. From my understanding, the car has electric steering and the ECU typically goes bad. I did pull the negative battery cable and waited over and hour. Reconnected, and started car and problem still existed. Shut car off, came out 45 min later to move it, and everything is fine. This morning, everything is still fine. Now possibly it is a fluke. But knowing the issues with these cars, i am planning for the worst. So my thought is to get a used PS ECU and prepare for replacement.  Can‘t afford for a dealer to do this for 800-1500US$.Has anybody done this?

 

Solution:

I’m not totally sure this is the problem, but it’s worth the effort if you can get it cheap enough. There’s absolutely no reason to pay a dealer to do this, as you can do it yourself in no time at all with basic hand tools.

scion-xb-power-steering

The referenced “remove instrument panel” points to a very large document, but basically, remove the radio trim and big piece above the steering wheel (as seen here) and look at this for reference. Not sure this is actually needed; you might be able to get by without:

scion-xb-power-steering-replace-1

scion-xb-power-steering-replace-2

Post-installation you’ll need to do a zero point calibration. If you have the cheap Xhorse Mini VCIToyota Techstream cable, just connect and go to Chassis > EMPS > Utility > Torque Sensor Adjustment and follow the instructions. If not, there’s a manual process you can do (I’ll have to dig up notes on it).

toyota-techstream-1030029-5

Scion xB 2009 Power Steering ECU Replacement

Toyota Techstream V10.30.029 Installation Guide

TOYOTA Techstream 10.30.029 diagnostic software is verified working. Here is the step-by-step software installation guide by obdii365.com.

 

Software Version: V10.30.029

Techstream cable:

The software interface supports Techstream (Mangoose VCIMINI VCI with 16 pin cable, Mini VCI 22-PINXhorse MVCI  etc) for Toyota, Scion and Lexus makes.

Multi-language:

Chinese/English/French/German/Indian/Japanese/Spanish

Techstream V0.30.29 installation viddeo download

1)Intall Tecshtream Setup

Open software CD or download Toyota Techstream software

Open and install Toyota Techstream 10.30.029 setup

toyota-techstream-10.30.029-1

Select software setup language,click Next

toyota-techstream-10.30.029-2

Click Next

Accept license agreement

Click Next

Enter User Name and Company Name,click Next

toyota-techstream-10.30.029-3

Click Install

Click Finish when installshiled wizard complete

 

2) Install software driver

Open software folder

Install MVCI Driver for TOYOTA

toyota-techstream-10.30.029-4

Click Next

Click Finish when complete the MVCI for Toyota TIS Setup

Copy MainMenu Application on software folder

Right click Techstream software on desktop

Click Find Target, paste and replace the MainMenu Application file on the bin folder

toyota-techstream-10.30.029-5

Connect the Toyota Techstream cable to the vehicle and then install device driver

Open Tecshtream software on desktop

Click No

Launch software

Click Setup tab->Techstream Configuration

Select Area

toyota-techstream-10.30.029-6

Select software language

toyota-techstream-10.30.029-7

 

3) Register/Activate TIS Techstream

Click Connect to Vehicle function button on the left, the system will require to enter registration  key

Open “serie” Notepad on software folder

toyota-techstream-10.30.029-8

Copy and paste the key to New key column

toyota-techstream-10.30.029-9

Click OK

Initializing USB Communication

Select vehicle information

toyota-techstream-10.30.029-10

Select engine module and the function you want to carry out

toyota-techstream-10.30.029-11

toyota-techstream-10.30.029-12

 

http://blog.obdii365.com/2016/02/22/how-to-install-toyota-tis-techstream-v10-30-029/

Mini vci Toyota Techstream v10.30.029 download

TOYOTA Techstream 10.30.029 is released at obdii365.com and verified working. Techstream v10.30.029 software can be downloaded free here.

 

Free download TOYOTA TIS Techstream 10.30.029 software:

https://mega.nz/#!qUoSRLZL!cGn74vplgBIsPy0II2PpBYIGtbuP7SLoSgKgpDOD7iE
password: autoprofessionals.org

toyota-techstream-1030029-1

Software version: v10.30.029

Multi-Language:English, French, German, Italian, Japanese, Spanish

 

Techstream compatible hardware cables:
The software interface supports Techstream (Mangoose VCIMINI VCI with 16 pin cable, Mini VCI 22-PINXhorse MVCIVXDIAG VCX NANO for Toyota etc) for Toyota, Scion and Lexus makes.

Techstream O/S requirement:
XP or “XP Mode” in Windows 7 (except win 7 home)
A part of users use VMware and XP Professional.

Toyota Techstream 10.30.029 software display:

toyota-tis-10.30.029-1 toyota-techstream-1030029-2 toyota-techstream-1030029-3 toyota-techstream-1030029-4 toyota-techstream-1030029-5

How to connect Techstream?
USB port plugs to laptop, the other end goes to the OBD2 port.
NOTE: You can put on top of the installed versions or from scratch.

Theme: Fresh Print by BlogBaker. Powered by BlogBaker.