Posts tagged with "vpecker easydiag"

Vpecker Indian Version Tested Perfect on Mahindra XUV500

Which diagnostic tool is working for cars in India and how to use it? Here is a test report: Vpeacker Easydiag Indian version diagnostic system OBD2 tested successfully on Mahindra XUV500 (India).
Purpose: OBDII diagnostics on cars in India
Indian car to be tested: Mahindra XUV500
Obdii diagnostic tool: Vpecker India (workingwell for cars in India)
Connection: Wi-Fi or Bluetooth (both OK)
OBII Test incl.:
Read ECU information
Read & clear fault codes
Read data list
Have an active test
Budget: less than $300
Cost in total: $229
How to use Vpecker India for Mahindra XUV500 diagnostics:
Connect the Vpecker India diagnostic tool with the car.
After connection, the indication light turn on red.
Check the connection of Wi-Fi or Bluetooth, if connect successfully, the indication light will turn to blue.
Run the Vpecker India WiFi diagnostic software, and start to diagnose.
vpecker-india-diagnose-mahindra-xuv500-1
Select the model: INDIA, MAHINDRA
vpecker-india-diagnose-mahindra-xuv500-2
Select XUV500 Vpecker inda diagnostic system comes with MAHINDRA V12 software
vpecker-india-diagnose-mahindra-xuv500-3
Select XUV500
vpecker-india-diagnose-mahindra-xuv500-4
Connecting ecu…
vpecker-india-diagnose-mahindra-xuv500-5
ECU is connected; XUV500 is ready for tests
vpecker-india-diagnose-mahindra-xuv500-6
Vpecker india scanner Read ECU Information: Success!
vpecker-india-diagnose-mahindra-xuv500-7
Vpecker India scanner Read Data List: Success!
vpecker-india-diagnose-mahindra-xuv500-8
vpecker-india-diagnose-mahindra-xuv500-9
vpecker-india-diagnose-mahindra-xuv500-10
Vpecker Indian version read data list: success!
vpecker-india-diagnose-mahindra-xuv500-11
Select the items you need:
vpecker-india-diagnose-mahindra-xuv500-12
Here take Accelerator pedal position
vpecker-india-diagnose-mahindra-xuv500-13
Read data of Accelerator pedal position via Wave
vpecker-india-diagnose-mahindra-xuv500-14
Click on the Record button to start data recording (Stop button to stop recording)
vpecker-india-diagnose-mahindra-xuv500-15
Click on the Play button, then Vpecker india displays the recording data list
Select one of them and replay the recording data:
vpecker-india-diagnose-mahindra-xuv500-16
Vpecker india has An Active Test on Mahindra XUV500: Success!
vpecker-india-diagnose-mahindra-xuv500-17
vpecker-india-diagnose-mahindra-xuv500-18
vpecker-india-diagnose-mahindra-xuv500-18
Test result on Mahindra XUV500:
Read ECU information……………OK
Read & clear fault codes……………OK
Read data list……………OK
Have an active test……………OK
Finished Mahindra XUV500 diagnostics within the budget. (Budget: less than $300; Cost in total: $229)
VPECKER Easydiag India diagnostic tool has verified to work perfectly on cars in India.
 

How to change Vpecker Easydiag WiFi name

Tips here would help you configure/change WIFI name for your WiFi Vpecker Easydiag wireless OBDII OBD2 diagnostic scanner with Battery configuration, ABS Bleeding, EPB, Oil Reset, TPMS, DPF reset special functions.

 

 

First, free download vpecker Wifi V6.2 Configuration Tool

http://www.vpecker.com/download/vpecker-wifi-upgrade-v6-2/

 

This tool can configure the name of your Vpecker wifi.

(If the name changed back the default name “HF-LPT120”)

 

Then, please follow the steps below:

 

Step1: Connect the WIFI “HF-LPT120” manually

Plug vpecker into vehicle, then make communication between vpecker scanner with laptop via WIFI. There is no need to enter password to connect wifi, just choose the vpecker easydiag wifi signal directly, the red light will turn to blue when finish the connection. Automatically identify vpecker and pecker version information when connection has wifi.

vpecker-easydiag-connection

(the RED light will turn to BLUE when connection success)

 

Step 2: Run the tool “Conf.exe”

 

Step 3: Click “Update” button and wait the data update successful

 

Step 4: Click “Wifi Conf” button

 

Step 5: Power OFF Vpecker and Power ON again

 

After that, the wifi name will change to the series number of Vpecker.

 

Vpecker Easydiag Scanner User Manual

 

NOTE:

There are two versions of VPECKER in  obdii365.com, one is WIFI version(sp247), one Vpecker Bluetooth version (sp247-b).

http://blog.obdii365.com/2016/09/26/change-wifi-name-for-vpecker-easydiag-scanner/

V8.3 Vpecker Easydiag adds Hyundai and Kia 2015

VPECKER Easydiag Wireless OBDII OBD2 Full Version car diagnostic scan tool software update to V8.3.

Vpecker scanner V8.3 Update Feature:
1. Beautiful action testing display interface.
2. Quick testing and connetion of WIFI.
3. New addition of Hyundai and Kia system into the ESS.
Update for Hyundai Car!

Hyundai DSS---Hyundai ESS----Hyundai Pro , system V13.0 to V18.0,
give you a more powerful device with new special functions.

Hyundai special functions: 
1. [N] Position The Adaptive
2. A/F Learning
3. A/F Value imposing
4. Auto Detected Configuration Reset
5. BSD Radar Calibration
6. Calibration
7. CLEAR CAN Learnable Status
8. Clutch Learning Reset
9. Current FOB Key Check
10. DCT Manual Input Function(Transmission Exchange)
11. ECM Neutralization
12. ECU Initialization
13. EMS Neutral Mode
14. Engine Test Off
15. EPS Type Recognition
16. ESCL ENABLE OUTPUT CHECK
17. ESCL OPEN STATUS CHECK
18. Get All S/W Version
19. IFU Neutralization
20. ISG TEST(Option)
21. LATERAL G SENSOR CALIBRATION
22. Limp Home Mode
23. LONG G SENSOR CALIBRATION(ONLY EPB)
24. Longitudinal G Sensor Calibration(HAC/DBC Only)
25. Neutral Mode
26. PAD Change Mode(After Change)
27. PAD Change Mode(Before Change)
28. Password Teaching/Changing
29. PRESSURE SENSOR CALIBRATION
30. Read VIN
31. Resetting Adaptive Values
32. Resetting Auto T/A Values
33. Resetting E - CVVT Values
34. Ring Break
35. Sensor Initialization
36. Smatra Neutral Mode
37. Update from CD
etc.


Vpecker Update for Kia Car! Covered up to 2015!


Kia DSS---Kia ESS----Kia Pro , system V13.0 to V18.0,
give you a more powerful device with new special functions.

Kia special functions: 
1. [N] Position The Adaptive
2. A/F Learning
3. A/F Value imposing
4. Auto Detected Configuration Reset
5. BSD Radar Calibration
6. Calibration
7. CLEAR CAN Learnable Status
8. Clutch Learning Reset
9. Current FOB Key Check
10. DCT Manual Input Function(Transmission Exchange)
11. ECM Neutralization
12. ECU Initialization
13. EMS Neutral Mode
14. Engine Test Off
15. EPS Type Recognition
16. ESCL ENABLE OUTPUT CHECK
17. ESCL OPEN STATUS CHECK
18. Get All S/W Version
19. IFU Neutralization
20. ISG TEST(Option)
21. LATERAL G SENSOR CALIBRATION
22. Limp Home Mode
23. LONG G SENSOR CALIBRATION(ONLY EPB)
24. Longitudinal G Sensor Calibration(HAC/DBC Only)
25. Neutral Mode
26. PAD Change Mode(After Change)
27. PAD Change Mode(Before Change)
28. Password Teaching/Changing
29. PRESSURE SENSOR CALIBRATION
30. Read VIN
31. Resetting Adaptive Values
32. Resetting Auto T/A Values
33. Resetting E - CVVT Values
34. Ring Break
35. Sensor Initialization
36. Smatra Neutral Mode
37. Update from CD
etc.
vpecker-v8.3-add-kia
vpecker-v8.3-add-kia-hyundai

How to update Vpecker Easydiag to V8.1

Vpecker Easydiag wireless OBDII full diagnostic scan tool software update to V8.1.

 

Vpecker Scanner V8.1 update plan:

1. Vpecker Client V8.1 (Update from “Setting -> Update” )
      1. Support the BlueTooth connection. (Need Bluetooth Version VPecker Easydiag, will release soon)
      2. Optimize the WIFI connection and license checking.
      3. Optimize the production activation.
      4. Fix some display bugs
5. Improved the communication link layer
2. SUBARU PRO V18.0 in ESS (Update from “Online store”)
    Covered up to 2015 models: Legacy, Outback, Forester, SUBARU XV, WRX STI, Tribeca, etc.
3. MITSUBISHI PRO V18.0 in ESS (Update from “Online store”)
    Covered up to 2015 models: 380, 73 TRUCK, ADVENTURE, CHALLENGER, CHARIOT, CLIPPER, COLT, DELICA, DION, ECLIPSE, EK-WAGON, ENDEVOR, EXPRESS, GALANT, GRANDIS, L200, L300, LANCER, MAVEN, MINICA, MINICAB, MONTERO, OTTI, OUTLANDER, PAJERO, TOWNBOX, TRITON, ZINGER/FUZION, i.
4. OIL RESET V18.0 in ESS (Update from “Online store”)

    Covered up to 2014 models: Citroen, Peugeot, Mini, Lincoln, Pontiac, Rover, Saturn, Vauxhall, Cadillac, Chevrolet, Chrysler, Dacia, Daewoo, Ferrari, Opel, Buick, Maserati, Saab, OLDSMOBILE, Renault, Volvo, Besturn, Acura, BYD, Holden, Dodge, Ford, Honda, Infiniti, Isuzu, Jeep, Lexus, Nissan, Romeo, Scion, Subaru, Toyota, Suzuki, etc.

 

5.VPECKER PROTON V13.0 

1. Add PERSONA ENGINE Easy-U 1.0
2. Add New SAGA 2008~ 1.3L Engine,Transmission,Airbag.
3. Add New SAGA 2009~ 1.6L Engine,ABS,Transmission,Airbag.
4. Add EXORA 2009~ 1.6L Central electronic.
5. Add EXORA BOLD 2009 1.6L Engine,Transmission,ABS,Airbag,Central electronic and ESP.
6. Add PREVE 2012 1.6L Engine,Transmission,Airbag,Central electronic and ESP.

7. Add SUPRIMA 2013~ 1.6L Engine,ABS,Transmission,Airbag,Central electronic.

 

EUROPE LANDROVER V13.0 “1. Update the database to 2015
1. Add special functions for main system, the detail see the function list.”
EUROPE JAGUAR V13.0 “1. Update the database to 2016.
2. Add special functions for main system, the detail see the function list.”
EUROPE PORSCHE V13.0 1. Update Cayenne to 2015.
PRO SUBARUPRO V18.1 Fix the bugs for TPMS.
PRO TOYOTAPRO V12.2 Fixed the bugs to support AVANZA before 2011.
ASIA TOYOTA V12.2 Fixed the bugs to support AVANZA before 2011.
ASIA PERODUA V13.1 Fix bug for air bleeding function of ABS 9.8.1.
MSS TPMS V18.0 1.Add: BMW, FORD, HONDA, LEXUS, NISSAN, PORSHE, TOYOTA
MSS EPB V19.1 1.Add: DAEWOO, GM, OPEL, SAAB, RENAULT, VAUXHALL
MSS TPMS V19.0 1.Add: JAGUAR, LANDROVER, SUBARU
MSS EPB V20.1 1.Add: JAGUAR, LANDROVER, SUBARU
vpecker-easydiag-v8.1-1vpecker-easydiag-v8.1-2
http://obdscanner.blogspot.com/2016/06/free-download-vpecker-easydiag-obd2.html

Wifi Vpecker Easydiag V6.8 Software download

VPECKER Easydiag V6.8 WIFI wireless diagnostic scanner software has been released for a few days. Vpecker V6.8 software can be free downloaded.

 

Free download VPECKER 6.8 to update:

http://www.vpecker.com/download/vpecker-easydiag-v6-8/

 

Operating system:

Win XP~Win 10

 

Languages:

Italian, Chinese (Simplified), English, Chinese (Traditional), Japanese, German, Russian, French, Spanish, Portuguese, Polish,Turkish, Dutch, Hungarian, Korean, Czech, Arabic, Indonesian, Persian, Thai, Vietnamese, Finnish, Swedish, Romanian, Bosnian, etc.

 

How to update VPECKER 6.8?

Every time you use VPECKER OBD2 scanner,

 

the system will automatically prompt to update.

vpecker-6.8-car-list (1) vpecker-6.8-car-list (2) vpecker-6.8-car-list (3)

You can download the newest software for all vehicles in the official site to install/ update; also, you could just click to update for your car:

 

 

Then, when you go back to update interface, you will get message “it has been the latest version.”

vpecker-6.8-update

WIFI Vepcker EasyDiag V6.8 Oil Reset Vehicle List

This is the vehicles/ models list for oil rest with V6.8 WIFI VPECKER Easydiag OBD2 full diagnostic tool, which tested by the VPECKER factory.

vpecker-easydiag vpecker-easydiag vpecker-easydiag-wifi

 

Acura

BYD

Baic

Mercedes Benz

Bestum

BMW

Buick

Cadillac

Cherry

Chevrolet

Chrysler

Citroen

Dacia Logan

Daewoo

Dodge

Ferrari

Ford

GMC

Holden VZ Commeodere

Honda

Hummer

Hyundai

Infiniti

Isuzu

Jeep

Kis

Lexus

Lincoln

Maserati

Mini

Nissan

OLDSMOBILE

OPEL

Peugeot

Pontiac

Renault

Rolls-Royce

Romeo 156

Land Rover 75

Saab

Saturn

Suzuki

Toyota

Vauxhall

Volvo

 

For details, Brand + Models + Year, to do oil rest by VPECKER:

http://www.obdii365.com/upload/pro/201602/vpecker-easydiag-oilreset_en_v19.02.pdf

 

Ps. VPECKER Easydiag Multilanguage User Manual

http://blog.obdii365.com/2016/02/18/wifi-vepcker-easydiag-v6-oil-reset-vehicle-list/

Review on Vpecker Easydiag WIFI Wireless Scanner

I have received the tiny USB shaped Vpecker obd2 wifi scanner from obdii365.com and tested the scan tool for a while.

 

The first thing was to download software from official website. Opening the website www.tdintel.com and download “Vpecker setup V4.13”. Software installation is easy within simple steps. Registration takes some steps, better follow their pdf guide (How to install and register Vpecker easydiag wifi), register with SN/password to download software, two mode optional, one by one click , or one-click.

It may take a long time to download all the software due to your network speed reason.

 

The genuine Windows XP-10 operating systems allows for more stable performances, better compatibility and expandability, extremely easy-to-use with touch-screen operation.  Smooth touch screen performance.

vpecker-easydiag-wifi-scanner-1

Multi language are able to be selected.  It has Demo, so even VPECKER easydiag scanner is not connected, it can simulate how VPECKER works.

 

Unit switch between Metric and Imperial system

Display modes between Full Screen and Fixed Size (2014×700)

Logging function is available; it can log the date of vehicle communication

If there is a new version, it can automatically prompt to update

 

Plug vpecker into vehicle, then make communication between vpecker with laptop via WIFI. There is no need to enter password to connect wifi, just choose the vpecker easydiag wifi signal directly, the read light will turn to blue when finish the connection. Automatically identify vpecker and pecker version information when connection has wifi

vpecker-easydiag-wifi-scanner-2vpecker-easydiag-wifi-scanner-3vpecker-easydiag-wifi-scanner-4

 

http://obdscanner.blogspot.com/2016/01/vpecker-easydiag-wifi-wireless-scanner.html

V6.4 WIFI Vpecker Easydiag Scanner Free Download

Obd365 released the newest V6.4 WIFI VPecker EasyDiag wireless diagnostic scan tool software (2016-01-11). All new info of VPecker EasyDiag V6.4 and free download link for sharing here!!

 

New V6.4 VPecker EasyDiag features:

1. Vpecker Client V6.4 (Update from “Setting -> Update” )
1). Support the BlueTooth connection. (Need Bluetooth Version VPecker Easydiag, will release soon)
2). Optimize the WIFI connection and license checking.
3). Optimize the production activation.
4). Fix some display bugs

2. SUBARU PRO V18.0 in ESS (Update from “Online store”)
Covered up to 2015 models: Legacy, Outback, Forester, SUBARU XV, WRX STI, Tribeca, etc.

3. MITSUBISHI PRO V18.0 in ESS (Update from “Online store”)
Covered up to 2015 models: 380, 73 TRUCK, ADVENTURE, CHALLENGER, CHARIOT, CLIPPER, COLT, DELICA, DION, ECLIPSE, EK-WAGON, ENDEVOR, EXPRESS, GALANT, GRANDIS, L200, L300, LANCER, MAVEN, MINICA, MINICAB, MONTERO, OTTI, OUTLANDER, PAJERO, TOWNBOX, TRITON, ZINGER/FUZION, i.

4. OIL RESET V18.0 in ESS (Update from “Online store”)
Covered up to 2014 models: Citroen, Peugeot, Mini, Lincoln, Pontiac, Rover, Saturn, Vauxhall, Cadillac, Chevrolet, Chrysler, Dacia, Daewoo, Ferrari, Opel, Buick, Maserati, Saab, OLDSMOBILE, Renault, Volvo, Besturn, Acura, BYD, Holden, Dodge, Ford, Honda, Infiniti, Isuzu, Jeep, Lexus, Nissan, Romeo, Scion, Subaru, Toyota, Suzuki, etc.

 

 

VPecker EasyDiag Software Download:

new VPecker EasyDiag v6.4 

Notice: Please save your account ID and Password. You will be asked to enter these info after update.

earlier versions:

VPecker EasyDiag v6.3

VPecker EasyDiag v4.13

VPecker EasyDiag v4.12

 

How to install VPecker EasyDiag v6.4:

Unzip Vpecker setup V6.4.zip and run Vpecker setup.exe

install-VPecker-EasyDiag v6.4-1install-VPecker-EasyDiag v6.4-2

Please click “Next”.

install-VPecker-EasyDiag v6.4-3

Please click “Next”.

install-VPecker-EasyDiag v6.4-4

You can change the path to install the software, then, please click “Next”.

install-VPecker-EasyDiag v6.4-5

Please click “Install”.

install-VPecker-EasyDiag v6.4-6install-VPecker-EasyDiag v6.4-7

VPECKER wireless diagnostic service system is installed successfully.

 

 

More operation troubles, please go to VPecker EasyDiag user manual

VPECKER Easydiag Error: Connect Vpecker failed(FIXED)

Here is the instruction on how to solve error “Connect Vpecker failed” for VPECKER Easydiag OBDII full diagnostic tool .

 

Complaints:

I registered and downloaded vpecker easydiag according to the video instruction offered. But there was something different from that in the video. I didn’t need to input information like user name, e-mail, etc. to register and activate my account. After installation, I used the demo mode to diagnose on my car but it cannot read information of the car, saying “Connect Vpecker failed, please make sure WIFI connected.

Connect-Vpecker-failed-fixed (1)Connect-Vpecker-failed-fixed (2)Connect-Vpecker-failed-fixed (3) the video shows as follows:

Connect-Vpecker-failed-fixed (4)

Connect-Vpecker-failed-fixed (5)

Possible reasons for “Connect Vpecker failed”

  1. Register Vpecker incorrectly. The software downloaded is DEMO mode.
  2. Download the wrong software, which match other devices.
  3. Users haven’t connected to the Vpecker scanner.

 

How to install VPECKER Easydiag full diagnosis:

Part 1: Install Vpecker

Part 2: Activate Vpecker

Part 3: Free download to update

Part 4: Diagnosis service system

-Vehicle list display

-Diagnostic case display

 

 

How to install VPECKER Easydiag WIFI OBDII software

How to install VPECKER Easydiag WIFI OBDII software

2015 new arrival VPECKER Easydiag WIFI Wireless OBDII full version diagnostic scan tool is the perfect replacement of multi OBD2 scanner tools, like X431 scanner at affordable price. It supports up to 70 car makers from European, Asian, American, and Chinese vehicle brands.

Software version: current V4.11
Update: online

Multi Language: English, Chinese, Japanese, German, Russian, French, Italian, Spanish, Portuguese, Polish, Turkish, Dutch, Hungarian, Korean, Czech, Arabic,  Indonesian, Persian, Thai, Vietnamese, Finnish, Swedish, Romanian, Bosnian, etc.

Computer requirement:
Hardware requirements: laptop, PC and PAD with Wi-Fi or Bluetooth. Space of system disk can’t less than 5G, and RAM can’t less than 1G.
Operating Systems: Win XP, Win 7, Win 8 to Win10 (NO Windows RT)
Network requirements:
The software needs to be activated & downloaded online, so please make sure your internet is connected.

VPECKER Easydiag Software installation guide:
Step 1: Software download
Step 2: Software installation
Step 3: Software activation
Step 4: Software upgrade

Step 1: Download software:
Browse to official website: http://www.tdintel.com/mod_download-fullist.html and download “Vpecker setup V4.11.zip”

Step 2: Install software
Unzip Vpecker setup V4.11.zip and run Vpecker setup.exe
install VPECKER Easydiag WIFI OBDII software
Install Vpecker Setup, press “Next”
install VPECKER Easydiag WIFI OBDII software
Select path to install software, press “Next”
install VPECKER Easydiag WIFI OBDII software
Click “Install”
install VPECKER Easydiag WIFI OBDII software
VPECKER wireless diagnostic service system installs successfully. Click “Finish”
install VPECKER Easydiag WIFI OBDII software

Step 3: Activate software

At first, please keep network working. Run VPECKER APP, then click “Online store” to get applications.
install VPECKER Easydiag WIFI OBDII software install VPECKER Easydiag WIFI OBDII software

The system will require to enter S/N number and password
install VPECKER Easydiag WIFI OBDII software
Get the S/N number and password from the envelope,
install VPECKER Easydiag WIFI OBDII software
Enter SN and password, press “Login” button
install VPECKER Easydiag WIFI OBDII software
If the software is not activated, please click “Yes”
install VPECKER Easydiag WIFI OBDII software
Please complete your information, the Email address and country are required, and then click “Activate” and then click “Yes”
install VPECKER Easydiag WIFI OBDII software

NOTE:
Note: Your email address must be real in order to get the activated link and the further better service from the manufacturer. The software update reminder and the new product release information will be sent to your email.
Company name: company name must be filled in and the length is within 250 characters.
Country: please choice your country in the list.
Press “Yes” to confirm your information:
install VPECKER Easydiag WIFI OBDII software

Step 4: Update software
After the activation, please login the online store again, and get the APPs upgrade
Login software and start to download update software

There are two modes for downloading, one by one and one-click. Software download may take sometime, please wait patiently until software you need to download is completed.
install VPECKER Easydiag WIFI OBDII software install VPECKER Easydiag WIFI OBDII software install VPECKER Easydiag WIFI OBDII software

Users can delete vehicle software here. You can delete one by one or all-selected delete.

http://www.obd365.com/wholesale/vpecker-easydiag-wireless-obd2scanner.html

Theme: Fresh Print by BlogBaker. Powered by BlogBaker.