Posts tagged with "vvdi 2"

VVDI2 Read Citroen PIN Code and Program Key

Xhorse VVDI2 PSA Peugeot Citroen key programmer software can read pin codes and do key learning for Citroën cars?
Definitely YES!
Engineers working for obdii365.com confirm this functions.
Attach photos of how to use vvdi 2 for Citroën read pin and key learn:
use vvdi psa software
use-psa-software
read pin available
read-pin
every time switch ON ignition, switch OFF/ON times vvdi increase 1
if the times not increase, please switch OFF ignition again, take key off ignition switch, wait above 10 seconds, then switch ON
repeat the procedure until the switch OFF/ON times increase 1
vvdi2-read-psa-pin-3
vvdi2-read-psa-pin-4
key learning
key-learning-1
key-learning-2
learning-key-working
VVDI 2 Peugeot, Citroën reviews:
citroen c4 work 100% for read pin
tested 100%
i read on Monday c4 pin with version 4.0… no problem 2006
citroen c4 I can confirm also it is working
I did c4 No problem
just read the pin and cs from ecu.
make backup from cluster, and the cluster configuration.
then make a dealer key, and learn it with pin.
my Peugeot 308 2008 BSI JC pin extracted OK. Key learn OK.
Tip: only for CAN line protocol based Peugeot, Citroën and DS cars.

How to Reset VW 3AA920880C Instrument by VVDI 2

Have just reset instrument on VAG 3AA920880C dash via Xhorse VVDI2 key programmer. Steps goes here:
First disassemble the dashboard 3AA920 880C
dashboard 3AA920 880C
Well connect VVDI 2 with dash
connect VVDI 2 with dash
Turn ignition to ON to check if the indicator light on which means the dash is fine and well communication is built
Turn ignition to ON to check
Open VVDI 2 software
Key Learn->4th immobilizer system->VW/Skoda/Seat->Auto detect type
Auto detect type
On the button status bar it shows type TFT color display NEC+24C64 (-2012)
Click on Read EEPROM/FLASH
Select Read EEPROM, click Next
Select Read EEPROM
If car has keyless, please switch ignition off then switch on. Then press OKAY button to continue.
If no keyless, just press OKAY button to continue.
reset-instrument
The dashboad is drak when you see the bps. You need finish all opeartion before reset instrument
2. Read EEPROM and save it
3.Read immo data and save it
4.Prepare a dealer key (You can go to step 7 if have working key also don’t want to add key)
5.Reset instrument
6.Add key, use immo data to lean the new dealer key to car
7.Finish other customer requests.
Note: The dashboard will remain dark until “Reset Instrument”
Reading eeprom data, please wait
Click on Reset Instrument, dashboard light go on
Click on Reset Instrument
Manually enter odometer you want to change
click on Write KM 
click on Write KM
Do you save the eeprom before write it?
Press OK
Press OK
Use “Reset Instrument” to activate instrument after all the operations finished.
activate-instrument
Click on Reset Instrument
Dashboard light goes on
Dashboard light goes on
Reset 3AA920880C instrument successfully.

Xhorse VVDI2 V1.2.2 Software Free Download

Original Xhorse VVDI2 VAG/BMW/Porsche key programmer software newly updated to latest V1.2.2 (27th, Otc 2016).

 

VVDI 2 latest software version V1.2.2 update
*** 2016-10-27
*** Require firmware V2.2.2

===== VAG V1.2.2 =====
1. Bugfix
===== BMW V1.2.2 =====
1. Bugfix
===== Porsche V1.2.2 =====
1. Bugfix
===== PSA V2.0.4 =====
1. Bugfix

===== Transponder Programmer V1.2.2 =====
1. Support copy transponder: HITAG2(46), 11, 12, 13, 7935(ID42)
2. Immobilizer data tool: bugfix BMW motorcycles
3. Bugfix

===== J2534 V1.2.2 =====
1. Bugfix
===== Online Upate Tool V1.2.2 =====
1. Bugfix
===== Quick Start V1.2.2 =====
1. Bugfix

 

Free download VVDI2 V1.2.2 software

https://mega.nz/#!7sAC1BKQ!wbye-88VPEU6oRPmaws6O4MPGrzeCyO7Oy31uYo1vSU

vvdi2-key-programmer

http://key-programmer.org/2016/10/27/free-download-vvdi2-v1-2-2-software/

VVDI 2 Program Audi A6 2009 8E Transponder

Here the tutorial on programming Audi A6 2009 8E Transponder key by using original Xhorse VVDI 2 Commander key programmer.

vvdi2-program-audi-a6-8e-transponder-1

Well set up and open VVDI2 software

Select vehicle brand: Audi

vvdi2-program-audi-a6-8e-transponder-2

Switch on ignition with original key

vvdi2-program-audi-a6-8e-transponder-3

vvdi2-program-audi-a6-8e-transponder-4

Select Key Learn->4th immobilizer system-Audi->Audi A6/Q7/Allroad

vvdi2-program-audi-a6-8e-transponder-5

Select chip type and click on read J518 eeprom dump

vvdi2-program-audi-a6-8e-transponder-6

Read Component security bytes and PIN(Login) Code

vvdi2-program-audi-a6-8e-transponder-7

Confirm info. and press OK

vvdi2-program-audi-a6-8e-transponder-8

Switch IGN off and switch it ON

vvdi2-program-audi-a6-8e-transponder-9 vvdi2-program-audi-a6-8e-transponder-10

Save data

vvdi2-program-audi-a6-8e-transponder-11

Write Componet security bytes and PIN(Login) Code

vvdi2-program-audi-a6-8e-transponder-12

Put Chip 8E into VVDI2

vvdi2-program-audi-a6-8e-transponder-13

Follow software prompts until the procedure is done.

vvdi2-program-audi-a6-8e-transponder-14 vvdi2-program-audi-a6-8e-transponder-15 vvdi2-program-audi-a6-8e-transponder-16 vvdi2-program-audi-a6-8e-transponder-17

Program Audi A6 transponder key is done!

http://blog.obdii365.com/2016/07/30/vvdi2-program-audi-a6-8e-transponder/

V1.1.5 VVDI 2 Software Free Download

Original Xhorse VVDI 2 VVDI2 key programmer for VAG Porsche BMW software has newly update to V1.1.5.

 

Free download VVDI 2 V1.1.5 installer

https://mega.nz/#!f85H1SgY!hglxf515Lyil1uRotrrnmuPDru9UVR4wAao1BbN4_ZM

Software version: V1.1.5

Firmware version: V2.1.4

 

VVDI2 V1.1.5 Update Feature:

*** 2016-06-06
*** Require firmware V2.1.5
===== VAG V1.1.5 =====
1. Bugfix
===== BMW V1.1.5 =====
1. Bugfix
===== Porsche V1.1.5 =====
1. Bugfix
===== Transponder Programmer V1.1.5 =====
1. Bugfix
===== J2534 V1.1.5 =====
1. Bugfix
===== Online Upate ToolV1.1.5 =====
1. Bugfix
===== Quick Start V1.1.5 =====
1. Bugfix

*** 2016-06-03
*** Require firmware V2.1.4
===== Note =====
VVDI2 – Transponder Programmer become part of VVDI Key Tool
While VVDI Key Tool run on VVDI2, it support the old function list in VVDI2 – Transponder Programmer, new function don’t support
While VVDI Key Tool run on new VVDI Key Tool device, it support all function: Transponder programmer, Special transponder, Immobilizer data tool, NXP renew, Copy transponder, Prepare Remote, Verify Key etc
===== VAG V1.1.4 =====
1. Bugfix for unit flash programmer
2. Guided function: Engine, ABS, Central Electric, Convenience, Instruments, Add.heating, Handbrake, Immobilizer, Airbag, Xenon, DPF etc
3. Bugfix
===== BMW V1.1.4 =====
1. Bugfix
===== Porsche V1.0.6 =====
1. Bugfix
===== J2534 V1.0.6 =====
1. Bugfix
===== VVDI Key Tool V1.0.0 =====
1. Support unlock toyota smart key: 40bit/80bit (Function list in Other Key Tool)
2. Special transponder: bugfix ZhongHua H230
3. Immobilizer data tool: bugfix Toyota Camry ECU 93C56
4. Immobilizer data tool: bugfix Toyota passo 93C66 4C
5. Immobilizer data tool: bugfix Nissan Qashqai 2010 9S12
6. Immobilizer data tool: bugfix Iveco Daily 93C56
7. Immobilizer data tool: bugfix Toyota Yaris 2001 25020
8. Immobilizer data tool: bugfix Renault laguna III 9S12
9. Bugfix
===== Online Upate Tool V1.0.9 =====
1. Bugfix
===== Quick Start V1.0.6 =====
1. Bugfix

How to update VVDI2 software & firmware

 

 

http://www.key-programmer.org/2016/06/22/vvdi2-v1-1-5-installer-download/

Handy Baby and VVDI2 program VW Golf key

Here’s the tutorial on programming a new key of VW Golf with JMD Handy baby key copy machine and Xhorse VVDI 2 key programmer. Now go to the point!

 

Model:

VW Golf

vw-golf

Chip type:

ID48 chip (the first generation IMMO, with independent the IMMO box)

id48-chip-for-golfvw-golf-key

Chip status before key-matching: Unencrypted, unlocked

Chip status after key-matching: Unencrypted, unlocked

 

Can be COPIED or not?

YES. ID45 chip can be copied with Handy baby key programmer

 

Need pin code?

Yes.

 

How to access the PIN?

– read PIN by VVDI key programmer

– disassemble the IMMO box to read PIN

(two types of IMMO box: 93C56 & CPU – CPU data cannot be read via OBD)

 

Mechanical lock features:

Door lock: 7 blade

Ignition lock: 8 blade

vw-golf-lock

Metal key head serial number:

31(HU66)

 

Door opening direction:

vw-golf-door

OBD port location:

The OBD port is located in the tool kit, under the lid with an ignition icon

vw-golf-obd-location

Key type:

Fold remote key

vw-golf-remote-key

Tool to generate:

KD600 or VVDI2 commander key programmer

 

How match the emote key?

The original key cannot be not used within 3 hours.

– Close all car doors;

– Antilockwise turn thw key in the lock and hold it

– Press the lock button twice

(if you need to program another new key, press twice again for another remote)

 

 

How to resynchronize the remote control?

Just turn the ignition on and press the lock button for 5 times or more, after a failure of the original remote control

 

Numerical control machine:

Option: HU66

 

IMMO data storage component

IMMO box: 93C56 or Motorola CPU

 

Key programmer to recommend:

Xhorse VVDI 2 key programmer

xhorse-vvdi2

NOTE:

Your dashboard data will be damaged if you read PIN from the dashboard; you should read some PIN from the IMMO box. If your Golf IMMO box is broken, replace it with a Santana IMMO box.

 

Hope this helps!

http://blog.obdii365.com/2016/06/05/handy-baby-vvdi2-program-a-new-vw-golf-key/

VVDI 2 and ND900 generate a Buick Enclave key

Obdii365.com engineers show us how to use Xhorse VVDI 2 key programmer to generate special chip for Buick Enclave, and recognize car key type with ND900 key clone machine.

Tools we need:

ND900 key programmer– used to recognize key type.

Xhorse VVDI2 Commander key programmer  – used to generate special chip.

One original key and one new key

 

Step-by-step operate instruction:

Engineers test on a Buick Enclave.

Buick-Enclave-01-300x169

See following picture, the left on in the hand is car owner’s
original key, and the right one is the key that is programmed.

Just now a peer put a common 46 chip into the key and then
program without success, actually, it is special chip.

original-key-and-key-made-02-300x169

Next, I will use VVDI 2 key programmer by Xhorse to generate special chip.

Firstly, insert the key with common 46 chip into the coil of ND900, the chip type is recognized as “46 brand new unused”, see picture as follows.

ND900-46-chip

Now I use VVDI2 to generate it as special chip.

Open VVDI2 Quick Starter, click on icon “Key Chip programming”.

vvdi2-key-programmer-function-04-300x169

Click “Generate Special Chip”, select “ID46 Chevry Circle Plus – PCF7936”, click “Generate”, special chip is generated

successfully, confirm it.

Buick-Enclave-05-300x169

Again put the key with special chip into the coil of ND900, the chip type is recognized as “Encrypted 46, brand new unused, encrypted mode”

Buick-Enclave-06-300x169

Next is to get on the car and program key manually.

Firstly, insert original key into ignition, turn on, wait till the immobilizer light off.

Then, insert the new key into ignition, turn on, wait till the immobilizer light off. Then the new key can start the car.

After the key is tested working, again put the new key into the coil of ND900, you will find “brand new unused” after “Encrypted 46” disappear.

Buick-Enclave-07-300x169

That’s all for the steps, hope it would help you!

 

http://key-programmer.org/2016/04/27/use-toyota-4d-g-chip-key-programmer/

Real review on original Xhorse VVDI 2 key programmer

Thanks Betto Zavaleta in Saudi Arabia for the review on original xhorse VVDI 2 Commander key programmer full package.

Bought one of vvdi2 full kits + VVDI 2 remote programmer after doing a lot of research from many sellers in China. The staff from obdii365 always responded quickly, answering all questions I had.

Shipping was very quick although DHL tracking didn’t work until package had arrived

(approx. 4 days).

Every item all appears to be in a good condition, each packed well in a paper box, no damage or scratch at all, although i though a plastic one would be better. The latest vvdi2 software 1.1.0 was in the disk (free download link i saw in the web also), then I installed the vvdi ii software and driver according to the user manual, common installation method, not difficult for me. Everything seems to work OK, which is exactly as stated.

vvdi-2-full-package

Lack of wireless connection to the vvdi 2 seems to be less convenient, but on cable it has worked consistently well anyway.

 

For people considering buying a kit like this for BMW & VAG group cars, the only advice I can give is that to buy the full package to avoid inconvenience of authorization (5th AUDI, BMW obd & CAS4+ authorization need extra pay if not full package; but it seems that they can open this function for those with Condor key machine.)  It’s a great toolkit to have for diagnostics, key programming, IMMO etc. though.

http://xhorse-vvdi.blogspot.com/2016/01/xhorse-vvdi-2-full-customer-review-by.html

 

Overall – I can highly recommend buying vvdi 2 or others from this vendor since everything was as advertised, plus they have fast response via emails if we users have issues or questions when using their products.

Theme: Fresh Print by BlogBaker. Powered by BlogBaker.